Dagwill
2nd September 2022, 04:06 PM
Hi, Ive come to a halt, and need help please.
Removing the head without removing inner timing cover.
Head is stripped, all bolts are out,, yes and the two behind timing chain tensioner.
I have broken the seal and can lift the head at the rear about 8mm.
At the front if I rock it from side to side it seems to pivot at a poiny just below the gear that conects the two cams and drives them.
I can lift either side 5 0r 6 mm, one side at a time but not both together.
I am wondering if there is a locating dowel in there. I have searched lots of pics and I cant find any sutch dowel.
As I am prying the head upwards I get to the point where I dont want to apply any more force,, somethings gonna break. ??
I will be replacing the head but dont want to damage the timing cover.
Any ideas please.
Removing the head without removing inner timing cover.
Head is stripped, all bolts are out,, yes and the two behind timing chain tensioner.
I have broken the seal and can lift the head at the rear about 8mm.
At the front if I rock it from side to side it seems to pivot at a poiny just below the gear that conects the two cams and drives them.
I can lift either side 5 0r 6 mm, one side at a time but not both together.
I am wondering if there is a locating dowel in there. I have searched lots of pics and I cant find any sutch dowel.
As I am prying the head upwards I get to the point where I dont want to apply any more force,, somethings gonna break. ??
I will be replacing the head but dont want to damage the timing cover.
Any ideas please.