PDA

View Full Version : Rd28 98 gu pos



BigT92
28th September 2021, 09:14 AM
Okay my mate has bought an RD28 gu has dreaded overheating issue.

Drive about 1km and cooks. top rad hose is really hot whilst bottom rad hose cold almost like stone. And dash says she's gonna blow!

Things that have been done
Reset timing (had it apart thought bugger it and replaced timing gear because being a bigger slug than normal)

New waterpump
New thermostat
New oem radiator
Complete shroud
New hub and fan
Compression test - normal
Leakdown test - top end is 100% Mickey mouse

After all this decided to pull a commodore trick and gut the thermostat and put the hat back in but no change in the cooking issue
Help please ���� I'm stuffed on ideas. Shy of New temp sender and sensor

mudnut
28th September 2021, 10:03 AM
Did you burp the system? It could be an airlock.

http://www.nissanpatrol.com.au/forums/showthread.php?28517-RB30-Facts-Figures-and-Helpful-Hints Post number 13 deals with that.

http://www.nissanpatrol.com.au/forums/showthread.php?41430-RD28-Important-things-to-check

the RD block is basically the same as an RB but is cast with a lot more metal to handle the higher compression needed for diesel.

If there is a lot of gunk in the cooling system, it could also be a blocked gallery.

BigT92
28th September 2021, 12:15 PM
Yes I did even put front axles on stands and tried bleeding. And bled from overflow like a ford

mudnut
28th September 2021, 03:11 PM
I hope a Diesel Guru can shed some more light on your problem.

PeeBee
28th September 2021, 03:22 PM
Condition of top radiator hose - not collapsing and blocking flow? Does it have an internal coil or one of the silicone one?

BigT92
11th October 2021, 11:48 AM
Sorry for delayed reply. Top rad hose is fine bottom looks abit how ya going but there's flow.