Front double cardan prop shaft

[TuffTD42]

Anyone run a double cardan front prop shaft? I need one to get rid of the vibration when in 4wd at speed. I'm just concerned about the cardan joint hitting the crossmember when the front right droops?

[Ben-e-boy]

Could you just run the joint at the diff end?

I haven't run a double cardin joint, but I have scalloped out the crossmember for drive shaft clearance.

[TuffTD42]

It's the transfer end where the angle is the problem.putting the cardan on the diff end defeats the purpose.

My old GQ 6" lift had the same vibration issue, i notched the crossmember for that one because the standard prop shaft hit. Never bothered with a cardan for it. I reckon this GQ (only 4" lift) vibrates worse. Been so long since I did the notch on that one, can't remember if there would be enough meat to take out to clear the cardan joint.