More power tb42e!!!

[Nico]

Have a 96 gq with a tb42e engine and am desperate for more power ! I have been wondering if anyone has turboed one and if so how to go about it ? How $ ? Boost levels ? Engine internals ? Lower compression level ???


Confused and frustrated any ideas or help would be appreciated : )

[patch697]

Welcome aboard... Drop in to our introductions section & post up an intro of yourself & a little on our Rig.



To throw a spanner in your thinking...lol... The answer is put a Ls1 in it & your power problem will be solved & it works out the cheaper way to go as well.

[YNOT]

Welcome to the forum Nico.

How much more power do you want?

For a mild power increase a set of extractors with a 2.5" mandrel bent system will do and cost $1,200 approx.

For a major power increase these engines take nicely to being turboed. If you keep the boost low - about 7Psi and fit a big intercooler you should be right with the standard internals and compression. The turbo charger off a Falcon XR6 turbo is a good match for the TB42. You will probably need a programmable EFI computer. Budget around $6,000 for a complete turbo set up (turbo, 3" exhaust, intercooler, computer etc).

There is also the option Patch suggested of dropping in a V8. Keep an eye on Bigrig's members ride thread, we're getting ready to drop an LS1 in his GQ in a few months.

Tony

[Bigrig]

G'day mate - welcome aboard. Great people, information and laughs on here mate, so feel free to join in and make the most of it. Enjoy!!

[Nico]

Hi Tony yeh I have herd about the turbos of the xr6 go well with the tb42e do u know wot type or turbo it is and what sort of rev range I can expect the turbo to spool and reach boost ? Another thing is my engine has just ticked ova 300k would it be worth rebuilding the top end or will low boost levels be ok ????

[Airstrike]

Howdy and welcome Nico

Patch when you say cheaper do you mean the LS1 and install complete job cheaper than a turbo option?? IM SOOOO TEMPTED to get a v8

Ryan

[YNOT]

Hi Tony yeh I have herd about the turbos of the xr6 go well with the tb42e do u know wot type or turbo it is and what sort of rev range I can expect the turbo to spool and reach boost ? Another thing is my engine has just ticked ova 300k would it be worth rebuilding the top end or will low boost levels be ok ????

I've never done the turbo conversion myself so can't say for sure. The Garrett GT35/40 fitted to the XR6 boosts up from about 1500rpm (I've driven heaps of XR6 turbo's and a few F6 Typhoons) on a 4 litre motor. Fitted to a slightly bigger 4.2 litre but lower revving motor I would expect about the same. It's essential the inlet and exhaust are as free flowing as possible so the turbo can breathe and boost as early as possible. A gated boost controller will help as well even if it is still set to 7 Psi, it will stop wastegate creep.
Fitting a turbo to a 300k old engine is living on borrowed time.

Tony

[zmaster]

Bloke in victoria does complete turbo setup, manifolds, injectors piggy back computer, everything you need in complete kit, about $8500 plus instal, sounds good but not cheap, will look him up and post details.

[MQ MAD]

To throw a spanner in your thinking...lol... The answer is put a Ls1 in it & your power problem will be solved & it works out the cheaper way to go as well.

From a fresh rebuilt TB42e , full turbo conversion
Possibly
LS1 , whats a full conversion 10K +
Thats a 2nd hand , non rebuilt motor

[zmaster]

AXT Turbo in Dandenong, gets good coverage in 4wd Action magazine, seems the goods.

[MudRunnerTD]

Given the Dollars being spoken about above and an assumption that you might be ready to do this now i have posted a link to a Turbo Engine that is for sale on another forum

Sorry for the link off site, would normally avoid it but the OP may well be right on the money with this engine ready to drop in for $3.5k

http://forum.mudrhino.com.au/viewtopic.php?t=16108

If i was looking for a Petrol engine then this may be it! you'd prob get $1000 for yours once you take her out too ;)

It looks really really tidy and has got lots of other stuff bolted to it that comes with the sale too.

cheers and good luck

[patch697]

Given the Dollars being spoken about above and an assumption that you might be ready to do this now i have posted a link to a Turbo Engine that is for sale on another forum

Sorry for the link off site, would normally avoid it but the OP may well be right on the money with this engine ready to drop in for $3.5k

http://forum.mudrhino.com.au/viewtopic.php?t=16108

If i was looking for a Petrol engine then this may be it! you'd prob get $1000 for yours once you take her out too ;)

It looks really really tidy and has got lots of other stuff bolted to it that comes with the sale too.

cheers and good luck

MR....I just tried your link & it only takes you to a log in page. If there is a way around this it would be great mate cos even if this memeber isn't interested another might be......

cheers
Paul

[MudRunnerTD]

MR....I just tried your link & it only takes you to a log in page. If there is a way around this it would be great mate cos even if this memeber isn't interested another might be......

cheers
Paul


No probs Paul

here is the guys add




Tb42 intercooled gas research turbo engine, all items 26000 ks old except bottom end, big front mount intercooler hidden behind grill, all mandrel bent pipe work, got brand new head (not reco) with gas valves and heavy duty crow cam valve springs, have receipt for $1989, gas research s440 throttle body and b2 converter and balance pipe, full electronic scortcher replacement high energy dizzy and coil to suit turbo with advance and retard, turbosmart dual port plumb back blow off valve, genuine temp sender, thermostat, and gaskets used in build, including head gasket, custom made spark plug leads, cooler range spark plugs, new 120amp altenator, monsta t3to4e turbo, denco highmount turbo manifold, all new belts, speco boost gauge, two gas tanks with a usable 168 litres of gas and equalizer valve, gas safety swich, all flexy gas lines, exedy clutch, new 3 inch exhaust from turbo, dumped at diff, sounds great, great oil pressure, runs perfect temp wise also, serviced with nulon oils, has made nearly 200rwkw on 35s. This is a complete engine ready to put in and go, runs great. ENGINE STILL IN CAR.

has had epa certificate of compliance done last year and passed, I have paperwork.

Only issue is the turbos internal gate or wastegate acuator, still boosts fine but will keep boosting if you keep your foot down as if there is no wastegate, can be fixed with external gate which would be better, but its not my daily so haven't changed it,
Runs great still and boosts good.

$3500 FIRM. PLEASE NO TIME WASTERS, GENUINE INQUIRIES ONLY.

comes with spares, b2 converters, gas lock offs and safety switches, Bosch 85 amp altenator, thermostat, radiator hose. And whatever else I can find.

please call or msg Andrew on 0413666805.

Located geelong, Victoria.

http://i1227.photobucket.com/albums/ee437/rangiedan/IMAG0021.jpg

http://i1227.photobucket.com/albums/ee437/rangiedan/IMAG0022.jpg

http://i1227.photobucket.com/albums/ee437/rangiedan/IMAG0024.jpg

http://i1227.photobucket.com/albums/ee437/rangiedan/IMAG0025.jpg

http://i1227.photobucket.com/albums/ee437/rangiedan/IMAG0020.jpg

http://i1227.photobucket.com/albums/ee437/rangiedan/IMAG0017.jpg



Looks like a really tidy setup, credit to him.

[patch697]

No probs Paul

here is the guys add



Looks like a really tidy setup, credit to him.


Your not wrong.................. Thats a sweet deal.................... Im copying the pics for future REF.................lol

[Bigrig]

No probs Paul

here is the guys add




Looks like a really tidy setup, credit to him.

Woohoo!!! I think I now own it!!!

[MudRunnerTD]

Woohoo!!! I think I now own it!!!

Really!!! wow! nice job.

I thought you were chasing an LS1 or LS2?

Glad it is going to a good home. That is a bargain for sure..

[Bigrig]

Really!!! wow! nice job.

I thought you were chasing an LS1 or LS2?

Glad it is going to a good home. That is a bargain for sure..

Yep and thanks old mate ... Patch is lobbing down on the weekend to check it out and off to Bigrig it goes!!! I didn't have a horn for a V8 as such, just wanted the power/torque and this engine is producing both of those in barrow loads!!

[MudRunnerTD]

Yep and thanks old mate ... Patch is lobbing down on the weekend to check it out and off to Bigrig it goes!!! I didn't have a horn for a V8 as such, just wanted the power/torque and this engine is producing both of those in barrow loads!!

Thats Awesome Scotty,

reading his add again it comes with all the bolt ons, the gas tanks even!!! the full exhaust! Everything!

Did you bargain him down at all?

Great Buy!

Cheers mate any time

Darren

[Bigrig]

Thats Awesome Scotty,

reading his add again it comes with all the bolt ons, the gas tanks even!!! the full exhaust! Everything!

Did you bargain him down at all?

Great Buy!

Cheers mate any time

Darren

Top deal indeed mate - as you said, it comes with literally everything so no haggling done .. if it is what it is in the advert (which Paul spoke to him about and the guy appears straight up as can be), then it's a bargain as is, and he deserves the dollars he's asking for it ...