Convert
19th December 2019, 07:17 PM
Hi
After reading through a few post I decided to take a look at my injector pump filter.
TD42.
It has a large head banjo with a 10mm hex bleed type bolt in the top of it and a long plastic looking filter inside the bolt.
What really surprized me was that the fuel hole through the side of the bolt was only about 5-10 thou diameter.
The filter was blocked badly.
Is this small fuel hole normal??
After reading through a few post I decided to take a look at my injector pump filter.
TD42.
It has a large head banjo with a 10mm hex bleed type bolt in the top of it and a long plastic looking filter inside the bolt.
What really surprized me was that the fuel hole through the side of the bolt was only about 5-10 thou diameter.
The filter was blocked badly.
Is this small fuel hole normal??