new member and saved by BIGRIG

[blazza]

G'day Guys

My names blare wilson or username blazza and i drive a 2000 model nissan patrol TB45 (petrol-gas)
running Superior drag link, tie rod, upper and lower control arms, super flex arms, drop out cones and coil retainers, ARB front and rear lockers, 2 and half inch exhaust with extractors and and mega flow muffler and free flow cat, iron man whinch and bull bar, ARB awing, and roof rack with 33 inch mickey thompson claws.

i love getting out there with other and having a play and discovering new places. when i get time i'll try to go camping or just go for a spin with the boys. and after today 19/6/2011 discovered the fun of bush mechanics :-)

Im from the sunny coast, located at palmwoods, and main 4x4 tracks i go on are yandina, mapelton and glass house mountains and time to time try out crusier park and looking forward to Mud Bulls and Music.

hope to see you guys on the tracks

catch ya later blare

[growler2058]

Gday mate welcome aboard theyre agood mob here full of useful info and advice

[Woof]

Welcome to the forum Blare, anyone who knows BIGRIG must be a bit dodgy but we will forgive you mate.

[GUtsy ute]

Welcome Blare,
Tell us more about how big rig saved you!!!
Join in and enjoy the Forum.

Cheers Gavin

[Bigrig]

G'day mate - welcome aboard. Great people, information and laughs on here mate, so feel free to join in and make the most of it.

Good to meet you today (irrespective of the circumstance! ;) ) and glad you made it back ok. Would be good to organize a day out up there again and do some wheeling!! Your truck is awesome looking and chock full of capabilities no doubt!!

Enjoy!!

[Bob]

Welcome Blare. Join in and enjoy

[YNOT]

Welcome to the forum Blare, where are the photo's of today???

Tony

[Bigrig]

Welcome to the forum Blare, where are the photo's of today???

Tony

Might want to throw up a photo of his rig - it's a pearler!!

[AB]

Welcome to the forum Blare, feel free to ask any questions and join in the conversations.

[DX grunt]

G'day Blare

Welcome to the forum.

Take care out there.

Rossco

[nowoolies]

g`day Blair
welcombe on board mate
heaps of laughs and bucket loads of info here enjoy
nowoolies
Paul
p:s piccies we luv piccies

[timbar]

'day Mate - Welcome aboard join in when you are ready and have fun mate plenty to do see and if u have any problems just ask and im sure u will get an answer !! Bucket loads of usefull information here plenty to read so join in meet the great bunch of guys and girls on our wonderful forum !!

You will not be disapointed !!


ENJOY and WELCOME

Tim

[Maxhead]

G'Day and welcome to the forum Blare

[Dhuck]

Welcome to the forum mate

[Sir Roofy]

welcome aboard blair enjoy your stay

[Clunk]

g'day blare and welcome aboard mate

[Finly Owner]

Hi and welcome to Nissans Nut House Blare, C'mon what happened that got Scotty to save ya? and where's the rig pics?

Tim

[Bigrig]

Hi and welcome to Nissans Nut House Blare, C'mon what happened that got Scotty to save ya? and where's the rig pics?

Tim

I wouldn't say I saved him mate - just helped out with a slight issue!! Let's just say some fence wire, an old shock rubber, and a piece of old thong did the trick!! lol .... no sh!t ... but you know how it goes, use whatever you have available!!!

[Finly Owner]

I wouldn't say I saved him mate - just helped out with a slight issue!! Let's just say some fence wire, an old shock rubber, and a piece of old thong did the trick!! lol .... no sh!t ... but you know how it goes, use whatever you have available!!!I'm not asking any more questions, if you are resorting to using Sandras' thongs to make someone mobile Mate! PML!

Tim

[Bigrig]

I'm not asking any more questions, if you are resorting to using Sandras' thongs to make someone mobile Mate! PML!

Tim

Hahahaha ... I'll say again mate, use what you gotta!!!! lmao

[blazza]

Hey guys, sorry for my late reply, I've been away for work. Ha ha yeah big rig helped that day, just say I need to do a few more mods so won't happen again. The rear of my gu got up to much flex and the rear diff walked and the tail shaft rubbed up against the bigger sub tank and busted a hole in that. Kid ya not fencing wire and bit of old thong can save the day :-). So in the end busted fuel tank, busted rear shaft and did loose $100 of fuel but in the end great day and meet some other keen as 4x4s lovers. Getting the fuel tank fixed this weekend and trying to source a tail shaft now. Thanks heaps big rig, and for sure dead set keen to go for a spin... Just trying to figure out this site to post up a pic of my gu guys. Big thanks to every one for the welcome messages to!!

[AB]

Hi mate, when you are posting if you click on "Go Advanced" at the bottom right of the page it takes you to a more detailed way of posting and then you just click the http://www.nissanpatrol.com.au/forums/images/editor/attach.png symbol to attach a picture from your computer.

The pics need to be under 1.9mb for the forum to handle the upload.

Let us know if you get stuck mate, just ask...

[Bigrig]

Hey guys, sorry for my late reply, I've been away for work. Ha ha yeah big rig helped that day, just say I need to do a few more mods so won't happen again. The rear of my gu got up to much flex and the rear diff walked and the tail shaft rubbed up against the bigger sub tank and busted a hole in that. Kid ya not fencing wire and bit of old thong can save the day :-). So in the end busted fuel tank, busted rear shaft and did loose $100 of fuel but in the end great day and meet some other keen as 4x4s lovers. Getting the fuel tank fixed this weekend and trying to source a tail shaft now. Thanks heaps big rig, and for sure dead set keen to go for a spin... Just trying to figure out this site to post up a pic of my gu guys. Big thanks to every one for the welcome messages to!!

Definitely get some pics up mate - it's a good looking unit!

[fixer982]

Welcome to the forum, Blare. There are lots of helpful folk here and lots of fun times and useful information to be had.

[blazza]

I can seem to find the attach button, then I looked down below in advanced reply and my posting permission says i can't posts attachment, don't know if that's because I'm new?

[Russell1974]

welcome aboard mate still good to hear that others still do help others and then look at were it brings u to more fun and enjoyment hope u figure out the photo thing will b good to c them

[blazza]

http://http://m.facebook.com/profile.php?id=1815432182&refid=7#!/photo.php?fbid=10150297005890127&id=730970126&set=a.10150105242115127.304884.730970126&refid=0. Hey guys can't get a pic up but here's a link to my face book with the photo, and I just joined u guys on face book to so have a look :-)

[blazza]

http://m.facebook.com/profile.php?id=1815432182&refid=7#!/photo.php?fbid=10150297005890127&id=730970126&set=a.10150105242115127.304884.730970126&refid=0

[YNOT]

I can seem to find the attach button, then I looked down below in advanced reply and my posting permission says i can't posts attachment, don't know if that's because I'm new?

Most likely yes. I think you need 25 posts up before you get full access.

Tony

[blazza]

Oh ok, yeah thought that was the problem, thanks mate, guess just have to post more ha ha, cheers bud

[AB]

Hi mate, you didnt confirm your email address when you signed up which puts you in a category that has errors.

I have manually confirmed your email address so you should be ok now.

I'll also fix that so even if people dont confirm their email can post pics, etc...

[blazza]

Oh cheers mate :-) thanks I'll post a photo up now

[NissanGQ4.2]

Welcome 2 the forum,

Great bunch of guys and girls on here always willing 2 help out when they can.

Enjoy the forum and what it has 2 offer.

Cheers

Todd

[Dark 1]

Welcome to the patrol community, have a poke around & join in when your ready.

[blazza]

Welcome to the patrol community, have a poke around & join in when your ready.

Hey thanks guys, hey i see u distribution of led light bars? Wondering how much two 30 inch ones would cost or a 40inch?

[Bigrig]

Hey thanks guys, hey i see u distribution of led light bars? Wondering how much two 30 inch ones would cost or a 40inch?

Shoot a PM to Dark1 (Kelvin) mate.

[blazza]

hey guys sorry, finally got a pic up, will have couple more later :)

[blazza]

Shoot a PM to Dark1 (Kelvin) mate.

oh ok cheers mate, wil do :)