Let's play spot the problem!!!

[First Pooy]

Can you spot the problem ? Where's Whally ?
79330

[MB]

Bit hard to see off the little phone screen but is that shocker remote hose routing going to get caught by a chunkier big tyre out bush FP mate?


Sent from my iPhone using Tapatalk

[Ben-e-boy]

Too much/heavy spring rate or wrong springs

[First Pooy]

Bit hard to see off the little phone screen but is that shocker remote hose routing going to get caught by a chunkier big tyre out bush FP mate?


Sent from my iPhone using Tapatalk

I have re-routed the hose since the pic but that is'nt the real problem lol

[nissannewby]

There are loose fasteners on the floor. Some look to be the shock bush,washer and nut. These need to be installed.....

[First Pooy]

Too much/heavy spring rate or wrong springs

We have a winner it was supposed to be a 3 inch lift wtf, I checked the code on the box and it said that it was the right spring but obviously it isn't right so I checked the code on the spring and rang superior engineering up and they said not only are they the wrong springs but they are for a Landcruiser wtf the right box wrong springs and not even patrol.springs this is what it was supposed to like like
79331

[First Pooy]

There are loose fasteners on the floor. Some look to be the shock bush,washer and nut. These need to be installed.....

You are right that is because the springs are so big that I can not even get the rubbers or nuts on

[Ben-e-boy]

I'd be moving the rear shock reservoir to inside the chassis rail. The tyre will touch that when it flexes

Thats problem Number 2.

[First Pooy]

I'd be moving the rear shock reservoir to inside the chassis rail. The tyre will touch that when it flexes

Thats problem Number 2.

Yeah that was a temporary mount just to get to home I wasn't really happy with it but I can not mount it where I was supposed to because of the long rang tank and If I go inside the rail I can not get to the reservoir to adjust it but at the moment that is the least of my problems