PDA

View Full Version : 2.8 timing marks.



colegate98
12th June 2011, 06:28 PM
hey all i have ripped the head off my gu because of blown head gasket and now time to put it back together i was wondering when puttin in the timing belt is there any specific specs to where the pump,cam and crank line up or do i just put the pulleys on the marks and thats that? and does anyone know what the inserts that go into the head that the injectors sit in actually do ?

all info will be appreciated. cheers ashley

YNOT
12th June 2011, 06:59 PM
If you down load the "1998 Nissan Patrol Manual" the timing marks that you need to line up are shown on page EM19 (page 99).

The injector inserts are a gasket to seal the injectors to the cylinder head.

Tony

the ferret
12th June 2011, 07:10 PM
When you put the harmonic balancer on, make sure you loctite it.
When you think you have the timing right, turn the motor over by hand 4 complete turns to double check.
This is best done with glo plugs out.
http://i608.photobucket.com/albums/tt164/ferret/2_8Timing.jpg

jsawrey
4th November 2017, 02:59 PM
doing same thing but no manual