GQ full rebuildt

[stig]

I have re-built the whole engin and ran for 30 min and shut down, then when re- started only ran for 5 seconds, cleaned all pluming and filters, stayed the same, took to local guy to fix and he priced me $2200, few days later he asked me 5K , went back an pick my truck up and cost me $700 to get a half dismantled pump with loose parts. Will buy myself a injector tester and see what I can do with my Pump????

[MudRunnerTD]

Hi mate, welcome. what engine is it? what country are you in?

[Dhuck]

Welcome to the forum mate.

[stig]

Thanks Guys, Living in Adelaide SA. TD42 Non turbo, made it turbo(all inside) from silver top motor.

[0-TJ-0]

A brand new pump would only cost you $2k-ish. Don't think it's something you can fix in your back yard.

If you want to get it fixed, take it to mtq at recency. They should sort you out. I think they also do new/built pumps. Otherwise I would recommend UFI in WA. I reckon they priced a 250hp 11mm pump at about the $2,300 mark. Few other reputable pump builders out there but I had good dealings with UFI - plus the pump the send is brand new.

[stig]

Thanks, will do injectors first and remove pump for repair.

[MudRunnerTD]

https://youtu.be/Bp3j0Ga-3k8

First run before problems started with pump or injectors

Taken from your other thread mate. Consider starting a thread in the general chat of mechanical chat rather than another intro thread, it will get lost here.

[MudRunnerTD]

I see that the air-filter is not hooked up and there is a Vac hose hanging off in the video. Is it all back together, sounds like t is running pretty good in that vid.

[stig]

Yes, all togeather but will start and then dies.

[0-TJ-0]

Checked your filter and fuel feed lines aren't sucking air?