View Full Version : thread size of temp gauge bung on thermostat?
Auspecial
11th August 2019, 01:08 PM
Anybody know this I'm trying to get an adaptor from 1/8npt to this for an after market gauge.
Auspecial
11th August 2019, 04:10 PM
In a td42 sorry
jff45
11th August 2019, 05:59 PM
It’s M12 x 1.5
Cuppa
11th August 2019, 09:15 PM
https://www.aeroflowperformance.com/af912-m12-01ss-m12x1-25-pipe-reduce-to-f-male
jff45
11th August 2019, 09:37 PM
https://www.aeroflowperformance.com/af912-m12-01ss-m12x1-25-pipe-reduce-to-f-male
I’m pretty sure it’s 1.5 pitch, not 1.25. Would be best to check before buying that reducer.
jff45
12th August 2019, 11:36 AM
Checked it to be sure. It’s M12 x 1.5
79170
Auspecial
13th August 2019, 09:44 AM
legends thanks guys!
Cuppa
14th August 2019, 06:23 PM
My bad. Sorry, meant to link to a 12 x 1.5 reducer. Just trying to be helpful as I knew aeroflow make one to suit 'cos that's what I used when fitting a redarc gauge to my TD42i.
Here is the link to the right one (https://www.aeroflowperformance.com/af912-m12-02ss-m12x1-5-pipe-reducer-to-f-male)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.