Rowlanr
26th May 2019, 03:10 PM
I am a little confused with the documentation which refers to an "O" ring between the front of the Cylinder Head and the Timing Case. I am replacing my cracked head with a new head, but can't say that I noticed an "O" ring when I removed it some months ago. Most of the documentation refers to the earlier non-CRD models.
Can somebody confirm whether the ZD30 CRD 2012 engine should have an "O" Ring. There are 6 such "O" rings in the gasket kit but none look suitable. I can see the hole in the gasket where it would go, but it doesn't really have a suitable place on the head. The timing case just doesn't look like it should have one.
Any help appreciated.
Can somebody confirm whether the ZD30 CRD 2012 engine should have an "O" Ring. There are 6 such "O" rings in the gasket kit but none look suitable. I can see the hole in the gasket where it would go, but it doesn't really have a suitable place on the head. The timing case just doesn't look like it should have one.
Any help appreciated.