td42t intercooler kit for factory non intercooled

[Viiper]

I've seen some kits around but they're pretty pricey at $1500+ does anyone know of any other kits that are cheaper?

[AB]

Are you going front mount or top mount?

Can get away with running a front mount pretty cheap using ebay and working out the piping yourself.

[0-TJ-0]

I know a guy with all the bits for a factory top mount going real cheap..

[Viiper]

Top mount, do you know if someones put a write up on the forums for it? There's a hardline that goes to the intake tube right on top of the engine that I have no idea what it's for, little stuff like that I'm not quite sure of would be great to know. I noticed that the mounting section ontop of the inlet manifold where the 90 degree bend is on factory non intercooled is just 4 bolts and nothing else, where as the 03+ factory intercooled ones have 3 holes that I assume are for some kind of vacuum lines.

[0-TJ-0]

Not sure what you're talking about? Pictures would help. I think you're talking about the vacuum lines that control everything for the egr system. You don't *need* any of that and the engine will be better off without it. If yours doesn't have it as standard, no issues.

You don't need anything special when fitting an intercooler. You just need to decide if you want top mount/front mount/water to air... if you want an easy to fit kit or buy the bits and do it all yourself.

[AB]

Yep as above mate throw up any pics and we can help.


Sent from my iPhone using Tapatalk

[Tip12345]

I have just removed a top mount what do you want ?

[Viiper]

This is the line I was talking about.
http://www.nissanpatrol.com.au/forums/images/imported/2019/02/1.png
Also this is the inlet flange I was talking about, this is the one for 99-03
http://www.nissanpatrol.com.au/forums/images/imported/2019/02/2.png
This is the one for 03 onwards
http://www.nissanpatrol.com.au/forums/images/imported/2019/02/3.png

[mudski]

This is the line I was talking about.
http://www.nissanpatrol.com.au/forums/images/imported/2019/02/1.png
Also this is the inlet flange I was talking about, this is the one for 99-03
http://www.nissanpatrol.com.au/forums/images/imported/2019/02/2.png
This is the one for 03 onwards
http://www.nissanpatrol.com.au/forums/images/imported/2019/02/3.png

That Line will probably go down to the injector pump. its for boost compensator, I think. when you run a boost controller this line Tee's intot he controller. As for the other pic, those would be mounting points for vac lines for an EGR system, which you dont have.

[moonie]

I got a standard intercooler off a 2004 4.2 you can have cheep

[MudRunnerTD]

Yes i have a factory intercooler off a 2005 including thr mounting bracket in Geelong. Happy to chat. Gone to a front mount.