TD42T (i maybe) into GQ - Winnie

[AB]

Gents, just trying to work out what else Winnie would need if he bought a TD42T or Ti block to put into his GQ.

Yes I did it but have a memory like a fish!!!



Water pump I think is same but the cover for the injector pump gear on timing case is different.
Block off Vac pump on timing case
Mount for the power steering pump
Tacho sensor spacer if TI
Rear main seal
Flywheel
New lines for turbo, oil feed and drain.
Alternator oil feed and drain (I think I had to replace one of them from the GQ set up)
Exhaust manifold studs, may as well.
Engine mounts (just for Winnies situation)
Gaskets, glue, etc etc

[Ben-e-boy]

You'll need lifters as they're smaller in a silver top.

I have a bare T block, . I have no vac pump though

Just buy a motor that has good compression and send it

[Winnie]

You'll need lifters as they're smaller in a silver top.

I have a bare T block, . I have no vac pump though

Just buy a motor that has good compression and send itSorry just to clarify that the motor we are looking at is a complete long motor.

Sent from my SM-G960F using Tapatalk

[Ben-e-boy]

Sorry just to clarify that the motor we are looking at is a complete long motor.

Sent from my SM-G960F using Tapatalk

Complete as in manifolds pump etc,

[Winnie]

Complete as in manifolds pump etc,Need to double check with them but assuming no bolt ons or manifolds.

Sent from my SM-G960F using Tapatalk

[Reddave]

I put a TI motor in mine,

Removed and blocked the EGR with a kit from performance 4x4 Queensland
Drivers engine mount is different if using the TI pump
Had to use GQ oil pressure switch
I’ve fitted a GQ tacho sensor with a spacer (GQ sensor is longer)
Used GQ loom, had the GU loom to steal plugs if I needed
I’m using the vacuum pump on the timing cover and a GU alternator
My motor came with the turbo flywheel
Everything else was bolt up

[AB]

Thanks gents, we are just looking for something for Winnie and if it goes ahead want to make sure we have everything sorted for a communal weekend build/install.

[Winnie]

Yeah pretty much just wanting to get a grip on what little things will pop up. Would love to be able to install and start up all in a weekend.

Sent from my SM-G960F using Tapatalk

[rusty_nail]

Why not throw in one of those bullet proof 3.0L di motors. I've heard good things about them [emoji16][emoji16][emoji16]

On a serious note if I'm available I'm more than happy to come help out.

Sent from my SM-G930F using Tapatalk

[MudRunnerTD]

8 have my old water pump your welcome too.

[MudRunnerTD]

Would be great to get the flywheel with the motor and the PS bracket would be a winner too. Id think you could negotiate that into the deal

[NissanGQ4.2]

Think you should just put in a TB4.2, I know of a good motor going for cheap in Sydney, ya just need 2 get the spark plug out :animierte-smil

[Winnie]

Are we going to be able to use my clutch? Mine is fairly new and I would like to use it in the new engine but have read some conflicting info on the internet.

[AB]

Yep the spline is same so will be fine.


Sent from my iPhone using Tapatalk

[Winnie]

Yep the spline is same so will be fine.


Sent from my iPhone using TapatalkI have read that the bolt pattern is different. Some people say that you can use a GQ clutch on the GU motor but not a GU clutch on a GQ motor.

Sent from my SM-G960F using Tapatalk

[AB]

Yeah ok mine fitted perfect with no modifications.


Sent from my iPhone using Tapatalk

[Winnie]

Yeah ok mine fitted perfect with no modifications.


Sent from my iPhone using TapatalkOkay awesome, good news cheers mate.

Sent from my SM-G960F using Tapatalk

[Winnie]

The sandwich plate on the turbo motor is different, it has a bigger hole for the bigger crank.
I can either buy a new one or grind out the hole to the larger size.
Does anybody know the measurement for the hole to fit the bigger crank?

Sent from my SM-G960F using Tapatalk