View Full Version : Boost guage not working
Shy260
29th May 2018, 04:41 PM
Hi guys my boost gauge has stopped working car runs the same just wodering where to start cheers
Hodge
29th May 2018, 05:04 PM
What type of boost gauge ? Mechanical, digital ?
What exactly isn't it doing?
Start by checking the boost hoses to and from the gauge and/or 12V supply of digital.
Sent from Note 5 using TapaPro
Shy260
29th May 2018, 05:16 PM
Mechanical just stays on zero was working fine untill i got it kinda realy stuck
Shy260
29th May 2018, 05:18 PM
How do i check vac lines do i just pull them of an put finger on the end to c if i feel vaccum
the evil twin
29th May 2018, 06:58 PM
How do i check vac lines do i just pull them of an put finger on the end to c if i feel vaccum
Are we taking Diesels?
If you have vacuum on your boost line that will explain why it is sitting on zero...
Pull the line off the back of the gauge,
Blow thru it (back towards the manifold),
If you can't the line is blocked
If you can either the line may be split or the gauge is knackered,
Grab a bike pump or a low pressure source of air (mouth if that is all you have) and blow in the back of the guage and see what happens
Shy260
29th May 2018, 07:14 PM
Oops ok i got the vacuum bit wrong lol..ile try what you suggested as soon as it stops raining can the gauges stuff up there pro comp cheers
mudski
29th May 2018, 08:25 PM
Mechanical just stays on zero was working fine untill i got it kinda realy stuck
Really stuck in what? The car stuck in something, or the gauge you got stuck?..
Shy260
29th May 2018, 08:38 PM
The car lol
mudski
29th May 2018, 10:43 PM
I love these guessing games.
the evil twin
29th May 2018, 10:59 PM
I love these guessing games.
ROFL... Betcha can't guess what I am thinking... ;-)
Shy260
30th May 2018, 10:10 AM
All hoses seem ok do the guages fail
Hodge
30th May 2018, 11:21 AM
All hoses seem ok do the guages failThey can definitely fail. I had a mechanical one, pointer needle came loose on the inside and was stuck at the bottom.
Sent from Note 5 using TapaPro
mudski
30th May 2018, 08:17 PM
All hoses seem ok do the guages fail
Yes. But heres what I would do. Remove the gauge from inside the car. Zip tie it to your windscreen wiper, install new hose from the boost reference point and then too the gauge and see what happens. This will rule out the hose being kinked, holed etc etc. If still no joy, the gauge it buggered.
Shy260
30th May 2018, 11:42 PM
Thanks giys ile give that a go ..gotta say i love this site its been a great help thanks to all
Shy260
12th June 2018, 08:03 PM
Hose under engine civer came of
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.