PDA

View Full Version : Hi All from Tassie Highlands



Blackspinner
15th May 2018, 01:44 PM
Hi All,
new to the forum, am chasing a manual and some belt info for my 2005 DX TD42Ti Patrol.
Having some belt issues...is the size 1270 or 1250, a 1270 has flipped off but seems way too big to go back on?

AB
15th May 2018, 04:56 PM
Welcome to the forum mate, you might get better responses by asking questions in a different section as a lot of folk don't read the intros.

Cuppa
15th May 2018, 05:39 PM
Hi All,
new to the forum, am chasing a manual and some belt info for my 2005 DX TD42Ti Patrol.
Having some belt issues...is the size 1270 or 1250, a 1270 has flipped off but seems way too big to go back on?

Welcome to the forum.

I'm not surprised you are having belt issues. My experience is that most of the aftermarket catalogues are wrong for my 2006TD42i. I went through similar issues to you. I doubt a workshop manual will help.

No guarantees that what fits my 2006 will be the same as your 2005 as Nissan apparently were not averse to making changes mid year, sometimes then changing back again. (No idea if that applied to belts though).

Anyway my notes on belts say
27/10/12 Drive belts replaced - different to those listed in Bosch catalogue!

Fitted Air Con -13A0965
Alternator 13A1145 *note 1150 or 1155 would be easier to get onto pulleys
Power Steering 13A1230 * note 1245 would also fit.

They have been problem free & are still in use (but will get changed before our next big trip just to be sure).

What area of the highlands? We were over there recently & found some of the highland roads a tad bumpy! ;)
http://www.nissanpatrol.com.au/forums/images/imported/2018/05/82.jpg

Dhuck
16th May 2018, 08:20 AM
Welcome to the forum mate

Mc4by
16th May 2018, 10:42 AM
Hello and welcome

4bye4
16th May 2018, 12:53 PM
G'day mate and welcome to the forum.