View Full Version : Intercooler Recommendation
jack
12th March 2018, 08:45 PM
Hello,
Looks like I have a pinhole in my Intercooler, what replacement do the gurus recommend (and why)?
I've seen some cheap eBay specials and some ridiculously priced ones up to $1600.
Cheers
nissannewby
12th March 2018, 09:06 PM
Do you have a budget Jack?
jack
12th March 2018, 09:50 PM
Do you have a budget Jack?
Unfortunately yes I do, and I'd like it to fit the standard hole in the bonnet.
mudski
12th March 2018, 10:02 PM
For a stock motor Jack, the cheap welded units will be fine. In my opinion, for a 3ltr, the cost per performance gain buying a top end cooler would not be worth it at all. A taller scoop will be far more effective than the OEM scoop.
nissannewby
12th March 2018, 10:07 PM
Unfortunately yes I do, and I'd like it to fit the standard hole in the bonnet.
One of the companies that does a welded recore should fine. Or one of the cheap units like mudski describes. I believe there some hpd knockoff ones available one eBay for a reasonable price.
jack
12th March 2018, 10:10 PM
Thanks guys, appreciated. Do you have any links?
Hodge
13th March 2018, 06:26 AM
On my 3L CRD I've used a DieselSmart unit.
It was ducks nuts compared to the leaky factory unit.
Sent from Note 5 using TapaPro
Hodge
13th March 2018, 01:32 PM
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=74719&stc=1http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=74720&stc=1http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=74721&stc=1
Fwdpatrol
13th March 2018, 01:55 PM
I have just upded to a diesel smart replacement has thermo fan and is 40% more volume of air
Full replacement
Went in great no issue
Drivers nicely
Bidja
13th March 2018, 02:24 PM
Jack, when I was installing NADS to my CRD (run max boost 22psi, ecu remap). I replaced the leaking OEM I/C with a unit that looks the same as Hodge pics (TIG welded).
It is a Chinese import that ADRAD supply (pt# CACBPNIS005CM) $470+gst (Aug 17). Works fine. PM me and I can let you know where purchased (ACT) if you would like to check out. They post gear all over.
mudski
13th March 2018, 08:18 PM
One of the companies that does a welded recore should fine. Or one of the cheap units like mudski describes. I believe there some hpd knockoff ones available one eBay for a reasonable price.
Yeah I met a guy some moons ago that had bought a HPD knock off for about $600. If was larger than the stock size by a fair bit. But it seemed useless to me as part of the intercooler was covered by the oem size of the hole in the bonnet for the stock cooler.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.