PaddyD
29th January 2018, 01:40 PM
Hi
I have a GQ Y60 hard top '91. I ordered new washer motors and bottle as my washers don't work.
As you can see from the following photo (new not-yet-installed washer bottle on top, old currently installed washer bottle below), the green motor is on a different side on my vehicle compared to the new assemble.
My question is where there is any difference between the front and back motors (I assume the green and shit are front and back) and whether I should change the motors around to match what's in the cvehicle (which has never worked since I bought the vehicle). The connection pin arrangement is different on each of the motors so I suspect they don't want me to use them interchangeably
Cheers
Paddy
74295
I have a GQ Y60 hard top '91. I ordered new washer motors and bottle as my washers don't work.
As you can see from the following photo (new not-yet-installed washer bottle on top, old currently installed washer bottle below), the green motor is on a different side on my vehicle compared to the new assemble.
My question is where there is any difference between the front and back motors (I assume the green and shit are front and back) and whether I should change the motors around to match what's in the cvehicle (which has never worked since I bought the vehicle). The connection pin arrangement is different on each of the motors so I suspect they don't want me to use them interchangeably
Cheers
Paddy
74295