View Full Version : Replacing td42 injector return rail
my93maverick
27th June 2017, 10:11 PM
Hey guys just need a point in the right direction of a thread or something to help me replace the return line on my td42 maverick any help would be appreciated as iv never attempted anything like this [emoji1] [emoji1]
Sent from my GT-I9505 using Tapatalk
mudski
27th June 2017, 10:20 PM
Pretty straight forward mate. Undo the injector lines, and the nuts, the rail will come off. Then reverse what you have just done.
my93maverick
28th June 2017, 10:37 PM
Sweet ill give it a go this weekend cheers
Sent from my GT-I9505 using Tapatalk
mudski
29th June 2017, 09:49 AM
Just be careful when undoing and doing up the nuts. As the rail can grab and twist which stuffs the rail. New washers every time....
my93maverick
29th June 2017, 02:13 PM
Lol that was my next question washers, yeah thats how i f#$ked it in the first place lol bleeding injectors and twisted the line im worried about doing this 1
Sent from my GT-I9505 using Tapatalk
mudski
29th June 2017, 02:33 PM
Just hold the banjo section of the rail with some pliers or the like when you tighten the nut up. And go slow.
Robo
29th June 2017, 05:35 PM
Fuel rail cheap on line for about 100 buckarooo's brand new genuine part
my93maverick
29th June 2017, 08:58 PM
Cheers for the tips mudski really appreciated I'll give it a crack this weekend see how it goes fingers crossed, I'll duck down repco see if they got one if not I'll grab one online just means waiting longer for parts undoubtedly nissan will charge to much.
Sent from my GT-I9505 using Tapatalk
AB
29th June 2017, 09:05 PM
As above advice but if you watch it and concentrate you shouldn't break it. Rushing it will though and they do have a little flex in them too.
Sent from my iPhone using Tapatalk
my93maverick
29th June 2017, 09:08 PM
Cheers AB
Sent from my GT-I9505 using Tapatalk
my93maverick
6th July 2017, 04:23 PM
Hey would anyone have any ideas on type and size of washers i need for the injector spill rail as everyone iv tried down here doesnt stock them
Sent from my GT-I9505 using Tapatalk
my93maverick
7th July 2017, 07:07 PM
So i got the fuel rail from all 4x4 kotara for $75 and had to get washers from the local diesel mech luckily he had 1 pack of washers left, finally some luck ☺
Sent from my GT-I9505 using Tapatalk
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.