Evening ppl

[Sir Roofy]

Can any body tell me what size bolt I need for
for the engine mount brackets are they fine
thread or course thanks in advance

its a 3l Di

[Maxhead]

I wonder if they have the size in the service manual Roofy?







................on the road

[Sir Roofy]

I wonder if they have the size in the service manual Roofy?







................on the road

Looked in the gregorys manual just says for bolts
might be 9/16 ill know better once I get it apart

[Maxhead]

Looked in the gregorys manual just says for bolts
might be 9/16 ill know better once I get it apart

I just checked the normal manual and they seem to have torque specs but not bolt sizes.
Bloody hard manuals to navigate..lol







................on the road

[Hodge]

I'm sure mudski has some new mounts ... He can check bolt sizes , measure up etc ... Maybe ? mudski

Sent from my SM-G920I using Tapatalk

[Sir Roofy]

I just checked the normal manual and they seem to have torque specs but not bolt sizes.
Bloody hard manuals to navigate..lol







................on the road

Not wrong there we will survive mate

[Sir Roofy]

I'm sure mudski has some new mounts ... He can check bolt sizes , measure up etc ... Maybe ? mudski

Sent from my SM-G920I using Tapatalk

Thanks mate have to wait till he's free I guess

[mudski]

The mounts don't use bolts, they have studs in them. The bracket is bolted to the chassis. I just check the parts catalog and theres no size written. They will be a metric fine thread. Are all the bolts missing? both sides? I think they are a 14mm head on the bolt, which should be a 12mm (1.5 pitch I think) by maybe 20mm in length. If you can get another out you can use this for reference.
11298VB912 for LHS and 11298VB913 for RHS, are the OEM numbers. 4 each you need for both sides. Not sure why they are different part numbers, most times I see this they are the same part, just different numbers. See if a local Nissan dealer ship can get them? They might be cheap enough from them for the right ones.

[Sir Roofy]

Thanks mate yea four bracket ones where missing the ones that bolt to the motor
was very lucky the motor didn't twist out

[Sir Roofy]

ITS done now I have to wash the blood off the motor and me
hate 3l motors with a vengeance
shouldn't come loose this time used lock tight

[Maxhead]

ITS done now I have to wash the blood off the motor and me
hate 3l motors with a vengeance
shouldn't come loose this time used lock tight

WOW, no stopping ya old mate!

What size was it out of curiosity?

[Sir Roofy]

WOW, no stopping ya old mate!

What size was it out of curiosity?

M 10 with a 1.25 pitch x 20mm long

[Hodge]

ITS done now I have to wash the blood off the motor and me
hate 3l motors with a vengeance
shouldn't come loose this time used lock tight
Well done Roofster ! No mucking around ey... Now drive the thing and your trips are going ahead!

Sent from my SM-G920I using Tapatalk

[Rossco]

Good work Roofy remember those things being a right P I T A ! ! Probly why they came undone, wasn't room to swing a flea in there . . .

Sent from my GT-I9506 using Tapatalk

[Sir Roofy]

Good work Roofy remember those things being a right P I T A ! ! Probly why they came undone, wasn't room to swing a flea in there . . .

Sent from my GT-I9506 using Tapatalk

Can be done mate even got the socket and ratchet in there

[mudski]

Top stuff mate. Now come around and pull the motor out of mine will ya!

[Avo]

i would have fencing wired it...

[mudski]

i would have fencing wired it...

Yeah but your a dodgy carnt....

[Hodge]

Cable ties

Sent from my SM-G920I using Tapatalk

[mudski]

Cable ties

Sent from my SM-G920I using Tapatalk

You too! :tease:

[Avo]

Yeah but your a dodgy carnt....

when i was a teenager got pulled over by the cops...lifted bonnet and we had engine wired in like a strainer,corner posts...twitched with a long bit of wood against engine block.....impressed him our ingunitty but he still stickered the good ol charger....IF it ain't wire....it ain't wurff it




should have put the engine keep tryin to jump out

[MB]

Gold AVO mate!! Charger 'V' :-)

[Sir Roofy]

Top stuff mate. Now come around and pull the motor out of mine will ya!

Ok you got plenty of band aids handy

[DX grunt]

Can any body tell me what size bolt I need for
for the engine mount brackets are they fine
thread or course thanks in advance

its a 3l Di

You need the correct size bolt. lol

[Sir Roofy]

You need the correct size bolt. lol

Yep same as your FLAG correct size got it done lol

[Plasnart]

Just catching up on this thread Sir Roofy.

What you need is M 10 with a 1.25 pitch x 20mm long

Hope that helps :bananarock:

Glad you got it sorted mate. Now off to Wonnangatta with you!

[Sir Roofy]

Just catching up on this thread Sir Roofy.

What you need is M 10 with a 1.25 pitch x 20mm long

Hope that helps :bananarock:

Glad you got it sorted mate. Now off to Wonnangatta with you!

Thanks Plassy going in next Wednesday for 4 days with the GDSA and North East branch Jane and I haven't been in with them for a couple of years Simpson Desert got in the way twice and then I had that op nothing holding us back now

[Winnie]

Do you know Phil and Zac Morrey from the GDSA? They are a father and son.

Sent from my SM-G935F using Tapatalk

[DX grunt]

when i was a teenager got pulled over by the cops...lifted bonnet and we had engine wired in like a strainer,corner posts...twitched with a long bit of wood against engine block.....impressed him our ingunitty but he still stickered the good ol charger....IF it ain't wire....it ain't wurff it




should have put the engine keep tryin to jump out

Avo

Farmers + fencing wire = cover ups of a multitude of sins. PML

V ..... "Hey Charger". It had to be said, coz I'm old enough to remember. PML.

Luv ya Avo

[mudski]

Ok you got plenty of band aids handy

And plenty of alcohol to help numb the pains...

[Sir Roofy]

And plenty of alcohol to help numb the pains...

I can start the last week in May :1062: