UHF install in Y62???

[satay]

Hi All, Anyone installed a UHF in the Y62 yet?

Im wondering if I can fit it in the Blank switch plates down near the right knee. Very keen to hear anyones suggestions.

Cheers,

[Cyclone]

Hi satay, I heve not yet got my Y62. It is due to land in Brisbane 13th April. While waiting I have done a little research. I will be fitting a GME TX3350 radio. This is a compact little unit that will fit easily under the dash. The controls and speaker are in the mic handset.
Regards
Sid

[satay]

Hi satay, I heve not yet got my Y62. It is due to land in Brisbane 13th April. While waiting I have done a little research. I will be fitting a GME TX3350 radio. This is a compact little unit that will fit easily under the dash. The controls and speaker are in the mic handset.
Regards
Sid

Ahh, congrats on the purchase. Ive only had mine about 4 weeks. I got the 2017 Ti. Now comes the fun part of fitting it out... What model / color did you get? Ive been running around getting prices on Bull bars etc this week $$$$

I saw a Y62 with the same setup as you suggested. Probably the best way to go I suppose.

[Cyclone]

Im getting the TI in pearl white. At this point I will not be puttting a bullbar on it. I think they are too heavy. I may put a custom nudge bar on it. That will be made by a company that specialises in stainless steel work. not generaly automotive. They made a nice one for their truck and I might get one for the Y62. I will also be fitting a redarc tow pro brake controller. This is a neat unit that can be fitted in a remote location. The control will fit in one of the blank switch covers.
Ahh, congrats on the purchase. Ive only had mine about 4 weeks. I got the 2017 Ti. Now comes the fun part of fitting it out... What model / color did you get? Ive been running around getting prices on Bull bars etc this week $$$$

I saw a Y62 with the same setup as you suggested. Probably the best way to go I suppose.

[satay]

Im getting the TI in pearl white. At this point I will not be puttting a bullbar on it. I think they are too heavy. I may put a custom nudge bar on it. That will be made by a company that specialises in stainless steel work. not generaly automotive. They made a nice one for their truck and I might get one for the Y62. I will also be fitting a redarc tow pro brake controller. This is a neat unit that can be fitted in a remote location. The control will fit in one of the blank switch covers.

Nice. I wasn't aware how heavy the bull bars are. I was looking at the ARB single hoop. Ill have to check out the weight. I have the Black Y62 and I wanted the bar in black.

I have been shopping for the Tow Pro Elite also. Getting installed this week hopefully. I have the dial going in the blank switch plate in front of the gearstick. I was hoping to get the UHF and have it installed at the same time hence the thread question. Ill check out that GME as that sounds like the easiest way to go.

Just discovered the dealer has fitted the Y62 tow pack but given me the Y61 tongue and ball......went to put it in on the weekend and it wouldn't fit.