ShakeyShake81
6th April 2017, 09:15 AM
Hi Crew,
I'm new to this forum and thread stuff, Just thought I'd share a bit of progress with my ute, I picked it up for a steal, it was sitting in a mates front yard for almost two years. Injectors were out the whole time it sat in the yard.
After a visit to Cairns Diesel Services withe the parts that came with the injectors.
4hrs later and a carton of corona sweetener for the workshop lads to have Friday drinks, I find out old mate I brought the ute from supplied me with genuine Nissan Parts. Which meant cheaper refurbishment cost.
So I go to install the injectors only to discover the injector ports hadn't been plugged the whole time. After a bit of mucking around with a vacuum cleaner , and a scribe and some rags n wd 40 threads cleaned up and the injectors went in ok we flushed the lines using Carby clean . Then I bleed up the injectors letting excess diesel clean out anything left in the lines.
Couple cold cranks and she's now alive. Little bit rough running. But running none the less
Once I figure out how to post a video I'll post it up.
Now to look aft the other bits n piece so I can put her over the pits
I'm new to this forum and thread stuff, Just thought I'd share a bit of progress with my ute, I picked it up for a steal, it was sitting in a mates front yard for almost two years. Injectors were out the whole time it sat in the yard.
After a visit to Cairns Diesel Services withe the parts that came with the injectors.
4hrs later and a carton of corona sweetener for the workshop lads to have Friday drinks, I find out old mate I brought the ute from supplied me with genuine Nissan Parts. Which meant cheaper refurbishment cost.
So I go to install the injectors only to discover the injector ports hadn't been plugged the whole time. After a bit of mucking around with a vacuum cleaner , and a scribe and some rags n wd 40 threads cleaned up and the injectors went in ok we flushed the lines using Carby clean . Then I bleed up the injectors letting excess diesel clean out anything left in the lines.
Couple cold cranks and she's now alive. Little bit rough running. But running none the less
Once I figure out how to post a video I'll post it up.
Now to look aft the other bits n piece so I can put her over the pits