PDA

View Full Version : Dx09 mods sourcing


DXsWag
2nd February 2017, 08:07 AM
Hi,
I have 2009 DX, I was wondering where would be the best place to get some of the basic mods like scanner, egr plate, Dawes and needle valve and boost controller. I've seen them on eBay but I'm guessing most of it might be cheap Chinese crap,
Also is MAF needed?
threedogs
2nd February 2017, 01:04 PM
You might want to try Northern 4x4 or mudski to discuss your NADS requirements
Having a CRD a "SCAN Gauge" would be my first purchase, and Yes the maf is needed

http://www.nissanpatrol.com.au/forums/showthread.php?30816-Welcome-Northern-4x4-AKA-Mudski
mudski
2nd February 2017, 02:30 PM
Hi,
I have 2009 DX, I was wondering where would be the best place to get some of the basic mods like scanner, egr plate, Dawes and needle valve and boost controller. I've seen them on eBay but I'm guessing most of it might be cheap Chinese crap,
Also is MAF needed?

Replied to your pm mate....
There is a mob on eBay selling chinese knockoffs of the Dawes and needle valve. I have written to eBay regarding this, along with an email from the guy who designed and makes the dawes, but like everything with eBay. It just falls on deaf ears. So I made up a vid showing the difference between the genuine item and the fake.
https://www.facebook.com/northern4x4parts/?ref=bookmarks

I sell MAFs aswell. OEM and aftermarket. Not needed as such but a real good idea to keep a spare in the glove box. If the maf dies, the car more than likely wont go anywhere.
DXsWag
3rd February 2017, 07:47 AM
When are you going to get more in stock mudski? Do you sell the SCAN gauge too?
mudski
3rd February 2017, 12:08 PM
When are you going to get more in stock mudski? Do you sell the SCAN gauge too?

They are on their way as we speak. Should be ready hopefully in about a week and a bit. I don't sell scan gauges sorry. But a very handy tool to have for your Patrol though.
DXsWag
3rd February 2017, 09:52 PM
Thanks mudski, I will keep an eye on your store in the coming weeks.
Any ideas where I can get a scan gauge with the install instructions etc?
threedogs
4th February 2017, 08:09 AM
Thanks mudski, I will keep an eye on your store in the coming weeks.
Any ideas where I can get a scan gauge with the install instructions etc?

I think the Scan gauge like my Ecu talk will just plug into
your OBD2 port under the steering wheel.
Hodge
4th February 2017, 10:49 AM
Thanks mudski, I will keep an eye on your store in the coming weeks.
Any ideas where I can get a scan gauge with the install instructions etc?

Scangauge is simply plug, and enjoy. Easy as that. I recommend getting the real deal. http://scangauge.com.au/