Ford or holden stud pattern.

[Rossco]

Hi guys, just got the old rims of the jayco that i was going to put on fleabay or Gumtree as the tyres are still really good, but don't know what stud pattern they are. Assuming either ford or holden, I know they are very similar. Is there an easy way to tell for sure without taking one down to the tyre shop ?

http://www.nissanpatrol.com.au/forums/images/imported/2017/01/119.jpg

[threedogs]

This may help
https://www.alltrailerspares.com.au/assets/documents/identifying%20stud%20patterns.pdf

A 6" steel rule should help, looks like there is 4mm difference approx
cntr to cntr 67.18mm [ford] compared to 63.45mm [Holden]

[Rossco]

Cheers 3D just measured looks like their holden. Easier said than done due to being recessed trying to get a rule in there nice & flat, ended up tracing holes onto sum cardboard, worked a treat ☺.

[threedogs]

Cheers 3D just measured looks like their holden. Easier said than done due to being recessed trying to get a rule in there nice & flat, ended up tracing holes onto sum cardboard, worked a treat ☺.

Should of suggested a tape measure, but problem solved lol