PDA

View Full Version : Projecta system issue



katwoman
28th November 2016, 04:06 PM
I have the Projecta 100 in my GU. Had it for quite a while. But lately its playing up.
Ive got curcuit breakers between each battery, the breaker between the main battery and the projecta keeps tripping. The AUX battery is r@@ted from being left flat.Is it the projecta or something else ?
Yendor, the evil twin ?

PeeBee
28th November 2016, 04:21 PM
A guy at work had a projector 100a unit that was not charging. I opened it up and it had water inside it. Looked nice and dry on the outside. Internals were corroded and shagged. Might pay to have a look. He doesn't do a lot of wet driving, so who knows where the moisture came from.

Yendor
28th November 2016, 06:03 PM
What size is the circuit breaker? Any lights flashing on the Projecta? Is the second battery stuffed or just discharged? Have you tried charging it with a 240 volt charger?

Have you checked the cable between the C/B and Projecta for damage?

katwoman
28th November 2016, 06:44 PM
What size is the circuit breaker? Any lights flashing on the Projecta? Is the second battery stuffed or just discharged? Have you tried charging it with a 240 volt charger?

Have you checked the cable between the C/B and Projecta for damage?

C/B is 100amp. No lights flashing. Aux battery will not hold charge. Cable seems fine.


Sent from my iPhone using Tapatalk

Yendor
28th November 2016, 07:33 PM
I would replace the battery first and then recheck the Projecta operation.

katwoman
29th November 2016, 06:29 PM
Thanks. And as it turns out my altenator is not doing its job properly, that cant help the situation.