Setting up a viscous fan

[taslucas]

So I'm about to order a new viscous fan hub as mine is screeching. I've decided to just get a new one instead of trying to refill the old.
What is the process for adding fluid? I've read where people have used a trial-and-error method of adding and testing to make the fan work at the right times but surely I can just put a set amount in and forget about it?

TB42s auto.

>>>tappin from tassie

[Winnie]

You have to pull it apart to put fluid in it. I think only the TD42 ones can be refilled?
A new one should come with the correct amount of fluid in it.

[taslucas]

Ahhhhh right awesome. The thread I was reading was about an rd28 and I assumed they were the same. Sweet

>>>tappin from tassie

[mudski]

You can fill the TB hubs but you need to drill a hole in it, put the oil in and then cap the hole off. Pretty sure I seen it done ages ago on the other forum.

[NissanGQ4.2]

Twin thermo's.............. they don't need oil *L*

[taslucas]

Twin thermo's.............. they don't need oil *L*
Your patrol doesn't even need wheels at the moment!


Harsh

>>>tappin from tassie

[NissanGQ4.2]

Your patrol doesn't even need wheels at the moment!


Harsh

>>>tappin from tassie

If it didn't have wheels I wouldn't be able 2 move it 2 get the camping trailer out!

It needs its wheels *L*