Rotorway1

[Ian hunter]

Hi to all the proper 4x4 owners I have had my GU for the last 10years and the times that I have used her for both work and R&R and always found her easy to work on with countless trips to cape York and the centre did av to have an engine rebuild at 400k and replaced the gearbox at 500k but determined to stay with the comfort of my G U and I live in outer nth of Melb.
Best regards to all

Rotorway1

[MudRunnerTD]

Welcome mate. Great place, enjoy

[AB]

Welcome to the forum mate, feel free to ask any questions.

[4bye4]

G'day and welcome to the forum mate.

[Dhuck]

Welcome to the forum mate.

[Bigcol]

welcome to the forum mate

[threedogs]

Hello Ian and welcome to the forum,,,enjoy eh

[MEGOMONSTER]

Welcome mate, surely the best forum on the net.
If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information.
Enjoy the sights and sounds of the greatest show on earth.


Sent from my iPhone using Tapatalk

[Ian hunter]

Thanks for yr replies fellas just lately after a big frost my 98 2.8 TD will only start once the outside temp is over 20deg av cleaned the maf; put in new glow relay and plugs :there is 12volts to the opp end of the glow strip from the batt for 20 secs .av seen previous threads about the crank sensor but should it be heat sensitive also my heat switch still gives high revs even after the eng shows normal op temp would be pleased to get some advice

[Corsta0211]

Hey mate, welcome to the forum. You should place your question here ( http://www.nissanpatrol.com.au/forums/forumdisplay.php?17-Engine-and-Drivetrain ) so that people can find it easier and help you.