PDA

View Full Version : H4 headlamp plug HELP



growler2058
26th September 2016, 08:07 PM
Please if someone has a photo of where to squeeze the FARKING plug to remove the headlight bulb on an 07 Patrol (DX). Ive taken bark off me hands squeezed every part of the connector with long nosed pliers but cant get the bastard off.

mudski
26th September 2016, 08:17 PM
Theres nothing to squeeze cocko. The plug just slips onto the 3 male blade terminals. Soak it in Inox or crc to help losen it.

Sent from my GT-N7105T using Tapatalk

growler2058
26th September 2016, 08:19 PM
Cheers ive been pulling it like a 13 year old boy and the whole farking bulb is trying to come out

jay see
26th September 2016, 08:37 PM
Had the same problem.
One side won't move and the other just about fall out.

Sent from my XT1068 using Tapatalk

Hodge
26th September 2016, 08:39 PM
Growler.
Been there done that mate. Taken a lot of blood and skin off my fingers .
Invented new swear words as I ran out of the old ones while trying to change the globes in the farkin' thing.
Juts take the whole headlight off - 3 x 10mm bolts. Comes out in under 60 seconds. Easy access to everything you can see what you're doing.
Thats what I do from now.

growler2058
26th September 2016, 08:50 PM
Theres nothing to squeeze cocko. The plug just slips onto the 3 male blade terminals. Soak it in Inox or crc to help losen it.

Sent from my GT-N7105T using Tapatalk

You ripper 20 second spray and the bastard near fell off in my hand!