front wheel bearings

[jman69]

Today i bought some front wheel bearings for the patrol. (1998 G.U. station wagon) Kit came with two seals, but the online manual image has only one as far as i can see. can anyone clarify please??

[Kimbo63]

You might have got the axel seals as well small seal about 30 mm diameter

[jman69]

No, the big one is about 88 mm and the other one is about 71mm.

[MudRunnerTD]

Have a look here mate there is an exploded diagram at the start and everything you need to know is there

http://www.nissanpatrol.com.au/forums/showthread.php?28969-DIY-CV-and-Swivel-Hub-Rebuild-Thread

[thebrod]

+1 for the guide linked in the post above.
I just did my front bearings and it is a great guide.

There is definitely 2 big grease seals. 1 goes on the back of the disc rotor ( I think that's the larger one), and the other goes on the kuckle spindle. It will be more obvious when you pull it all apart.

Adam

[jman69]

Thanks everybody. After reading the rebuild thread it looks much clearer. I now feel fairly confident to do my bearings, thanks again.

[growler2058]

Easy enough job mate, its just a filthy dirty bastard of a job :0