Glow plug rocket cover oil seals

[Gun517]

Hi I think my glow plug oil seals need replacing. Is hard job or pretty easy ☺️

[mudski]

Glow plug seals are easy. Just remove the intercooler, then the glow plug rail, unscrew the seals and replace.
The injector seals however requires you to remove the injector lines and then use a screw driver and lever out the old seals then replace.
Just remember to bleed the fuel system properly or you will damage the injector pump.

Sent from my GT-N7105T using Tapatalk

[Gun517]

Thanks for that 👍

[Gun517]

Hi all went well but I found a lot of black mud in air intake is hard to get the intake off ( fuel line ) to clean it 😳