MELB - FREE OME 2inch lift From a GUII and a ZD30 Di intake manifold

[mudski]

I need to get rid of this. Came from my GUII wagon. I kept it just incase I got done for my 4inch lift. I don't need to keep it now so I want it gone. The Nitro charger shocks are not leaking at all and still have their usual feel in the stroke. The springs are sagged. But I had 20mm spacers in them to bring it back up. Rear spacers come with it, fronts, who knows where they are. Lol Panhards and rear control arms come with it. Take one, take all. Front shocks have the rubbers, the rears I have only one, but I would advise to replace all anywany.
It still good for someone with no lift and can't afford to put a new kit in right now.
68583



I also have a ZD30 Di intake manifold here. It was used as a change over when I did the manifold clean out. Big thanks to Big_Fletch for donating this to me. Where is he BTW? So I will pass this on. No pic for this, we know what they look like, its dirty and needs a good clean....



Plus two GUII Front radius arms No bushes in them, and a front sway bar.

Cheers.

[jay see]

So I take it that it all passed the engineers

Sent from my XT1068 using Tapatalk

[MudRunnerTD]

Is be keen on the Radius Arms and sway bar mark. What thickness is the sway bar mate?

[mudski]

So I take it that it all passed the engineers

Sent from my XT1068 using Tapatalk
Yep! :Yahoo!: Still haven't got my car though....

Is be keen on the Radius Arms and sway bar mark. What thickness is the sway bar mate?

The radius arm will fit your GQ but not your GU. The sway bar link spacings on the later GU are further apart. The sway bar is the standard 19mm one, from the earlier GU's.

[MudRunnerTD]

Interesting? Why was not the radius Arms fit the GU? I am chasing them just as spares for either car to be honest. I don't think I have a spare set.

Do you know how much wider the sway bar is than the GQ one? Was keen to grab it for the GQ actually. Obviously the GQ is running GU diffs.

[mudski]

Its the bolt spacings where the sway bar bracket bolts up. From memory the gq and early gu is 75mm and the later gu is 90mm.
As per my text bud someone is keen on the lot. I just need to tell him if the arms and bar is taken...
Cheers.

Sent from my GT-N7105T using Tapatalk

[MudRunnerTD]

Its the bolt spacings where the sway bar bracket bolts up. From memory the gq and early gu is 75mm and the later gu is 90mm.
As per my text bud someone is keen on the lot. I just need to tell him if the arms and bar is taken...
Cheers.

Sent from my GT-N7105T using Tapatalk

No dramas Mark, I'd just be grabbing spares mate, if rhey need them go for it, if they are just grabbing spares too then I'll take them mate, it'd be my luck I say give me away and break an arm next trip out and have to pay $100 from a wreckers!

Let me know a pickup address and I will try and plan it into my next run over your way mate.

[BigRAWesty]

No dramas Mark, I'd just be grabbing spares mate, if rhey need them go for it, if they are just grabbing spares too then I'll take them mate, it'd be my luck I say give me away and break an arm next trip out and have to pay $100 from a wreckers!

Let me know a pickup address and I will try and plan it into my next run over your way mate.
Can always cut it off and grab a bolt on mount.

[Sprock]

I'll have that manifold mate if you've still got it ?

[mudski]

No dramas Mark, I'd just be grabbing spares mate, if rhey need them go for it, if they are just grabbing spares too then I'll take them mate, it'd be my luck I say give me away and break an arm next trip out and have to pay $100 from a wreckers!

Let me know a pickup address and I will try and plan it into my next run over your way mate.
Ok. I tried ringing the other guy just now and he hasn't answered. I'll let you know on the outcome. are you after the sway bar too?

I'll have that manifold mate if you've still got it ?

Yeah mate. Its got your name on it.

[MudRunnerTD]

Ok. I tried ringing the other guy just now and he hasn't answered. I'll let you know on the outcome. are you after the sway bar too?


Yeah mate. Its got your name on it.

Yeah I'll grab the sway bar too mate

[MudRunnerTD]

Can always cut it off and grab a bolt on mount.

Yeah was my thinking too.

[Sprock]

Ok. I tried ringing the other guy just now and he hasn't answered. I'll let you know on the outcome. are you after the sway bar too?


Yeah mate. Its got your name on it.

😘 Thanks mate

[mudski]

MudRunnerTD. Darren it looks like this bloke who's taking the springs wants the lot sorry mate. When I change my arms over to the superflex you can have whats on my car. When ever that happens.

[MudRunnerTD]

MudRunnerTD. Darren it looks like this bloke who's taking the springs wants the lot sorry mate. When I change my arms over to the superflex you can have whats on my car. When ever that happens.

No probs at all mate. Cheers bud