Patrolze92
28th July 2016, 11:08 PM
Hee guys new to the forum, i have a 92 patrol tb42efi that hopefully brings me around straya
Already found a lot of sweet solutions for stuff i was struggling with, however i can't find the solution to the problem with my electric windows
Few days ago i went 4wheeling and got stuck in the mud all great fun only after that all my electric windows stopped working, they worked before, also tried every window separate but no movement.
looked for the relay under the glovebox but couldn't find it only see:
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2928_zpslxo9vyp1.jpg
On the left on the last picture you see a black wire hanging lose, this was hanging lose when i pulled the carpet out. doesnt seem to connect to anything
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2929_zpsqmlyxjwy.jpg
Looked at the fusebox and relays near the gas pedal, checked them and as far i could tell they were all good.
Looked next to the battery and found multiple relays, checked them all and they all clicked, didnt check resistance do. This is whats under the bonnet:
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2930_zps9vewljvu.jpg
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2931_zpscv3gkoh9.jpg
Checked the ground, cut the wire straight coming out of connector of the power window driver side panel and connected a ring terminal, connected it straight to a ground on the door. (Not connected to the door on the picture) Have connected the motor directly to the battery and that does work.
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2932_zpspj2fqmvf.jpg
So probably there is a relay i didnt found yet or there has to be a break in a cable, what is the best way to go from here?
Thanks guys
Already found a lot of sweet solutions for stuff i was struggling with, however i can't find the solution to the problem with my electric windows
Few days ago i went 4wheeling and got stuck in the mud all great fun only after that all my electric windows stopped working, they worked before, also tried every window separate but no movement.
looked for the relay under the glovebox but couldn't find it only see:
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2928_zpslxo9vyp1.jpg
On the left on the last picture you see a black wire hanging lose, this was hanging lose when i pulled the carpet out. doesnt seem to connect to anything
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2929_zpsqmlyxjwy.jpg
Looked at the fusebox and relays near the gas pedal, checked them and as far i could tell they were all good.
Looked next to the battery and found multiple relays, checked them all and they all clicked, didnt check resistance do. This is whats under the bonnet:
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2930_zps9vewljvu.jpg
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2931_zpscv3gkoh9.jpg
Checked the ground, cut the wire straight coming out of connector of the power window driver side panel and connected a ring terminal, connected it straight to a ground on the door. (Not connected to the door on the picture) Have connected the motor directly to the battery and that does work.
http://i50.photobucket.com/albums/f301/Freek_Loenen/IMG_2932_zpspj2fqmvf.jpg
So probably there is a relay i didnt found yet or there has to be a break in a cable, what is the best way to go from here?
Thanks guys