Westy's Tillix Setup and Rundown

[BigRAWesty]

Ok so tillix is in..
Sooooooooooo easy..
Crazy easy..
Still some micro tuning to do but very happy..
19-20 max boost and 16 @ 110.
That 16 @ 110 is what I want to reduce a smidgen so will fiddle a little more with needle valve. mudski your spot on about the needle valve..
1/8 turn goes from what I have atm to 15psi max, laggy as hell and egt's sky rocket..
But overall for the money it's a top kit..
I tig welded the socket onto the intake pipe, and tapped a threaded barb into the intercooler for boost gauge..
http://www.nissanpatrol.com.au/forums/images/imported/2016/07/17.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2016/07/18.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2016/07/19.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2016/07/20.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2016/07/21.jpg

https://youtu.be/7tQziIey884

[mudski]

For some reason I thought you had a direct injection motor. But yeah. Theres no point at all just putting in the Dawes or Tillix. The needle valve is where you get the performance.

[Woof]

Just made this thread Sticky Westy, I am sure it will come in very handy for members mate..........well done

[BigRAWesty]

Just made this thread Sticky Westy, I am sure it will come in very handy for members mate..........well done
Thanks mate.. hopefully I've done it right lol

[threedogs]

I used this hose for the boost line, note it has clamps for each connection,
If I ran out of clamps I had blue cable ties on hand to achieve the same thing

http://www.ebay.com.au/itm/1-5M-4MM-I-D-Blue-Silicone-Vacuum-Boost-Vac-Hose-Pipe-Tube-T-piece-6-Clamps-/251526773208?hash=item3a9029f9d8:g:6moAAOSwlPRTbMj q