An idea westy?

[AB]

Get on it mate!

[Dannyboyz]

I like that AB! Get a few snags on a 35 inch barby plate 👍

Cheers, Danny
.................................................. .............
1998 GU wagon - 2.8 out - mighty 4.2 in. Locked front and rear with 4.6 ratios. 4 inch heavy duty coils. Tough dog adjustable shocks. Too much to mention and hopefully more to come.

[jack]

They are quite common in South Africa, they love their braais. Mate had one in his patrol many years ago.

[Makka]

dont leave camp till it cools

[BigRAWesty]

Get on it mate!
Where will we put your spare wheel bag?

I did make a couple of BBQ plates for FNQGU and his mate from 6mm plate and rod..
folded flat. From last talks they loved em..
The problem is prices. .
I think mine were $180 each..
I can't compete with the $30 pos.. even though it's 1.6mm sheet and expanded mesh..

[threedogs]

there are some photos in the forum somewhere ,,,on the rear
of some 4x4s in the big sand pit , {Saudi]

[FNQGU]

Yep, can vouch for 6mm plate...

Loads of BBQ jealousy conversations around that thing mate.

[BigRAWesty]

Yep, can vouch for 6mm plate...

Loads of BBQ jealousy conversations around that thing mate.
That's good to hear..

[AB]

Where will we put your spare wheel bag. a spanking new 35" centipede fits snugly under a bag mate so anything under that should be fine.

[BigRAWesty]

a spanking new 35" centipede fits snugly under a bag mate so anything under that should be fine.
I see what your saying.. no good for 35's though and the bag..

[AB]

I see what your saying.. no good for 35's though and the bag.. I still think it would fit though.

Let's make one and I'll try it out ;)

[BigRAWesty]

I still think it would fit though.

Let's make one and I'll try it out ;)
Say the word boss and I'll make it..

[AB]

Say the word boss and I'll make it.. Unfortunately my $$$ is my build at the moment mate but "word" ;)

[BigRAWesty]

Unfortunately my $$$ is my build at the moment mate but "word" ;)
I'd hate to see your build bills lol..
Mine are bad enough..

[threedogs]

even laser cut from 6mm SS would add $$$ to the cost, but would look ideal

[kevin07]

rather than have the legs in place like that my bbq plate has nuts welded on and I screw the legs on other than that sits on the floor in a bag

[BigRAWesty]

rather than have the legs in place like that my bbq plate has nuts welded on and I screw the legs on other than that sits on the floor in a bag
The ones I made for FNQGU all folded flat. Legs tucked under it..