PDA

View Full Version : Toyo uni joints



Sir Roofy
6th June 2016, 10:37 AM
Hi guys what would you expect to pay
for the rear drive shaft uni joints

nissannewby
6th June 2016, 10:46 AM
Around 50ea

Sir Roofy
6th June 2016, 10:56 AM
Around 50ea

thanks Mat got quoted 65

nissannewby
6th June 2016, 01:20 PM
thanks Mat got quoted 65

Threedogs might be able help you out with the price and all his contacts

threedogs
6th June 2016, 01:28 PM
Might want to give Neil a buzz at Roo Dog spares
http://stores.ebay.com.au/ROODOGS-4WD-SPARES

nissannewby
6th June 2016, 02:38 PM
Might want to give Neil a buzz at Roo Dog spares
http://stores.ebay.com.au/ROODOGS-4WD-SPARES

How much can you get them for?

mudski
6th June 2016, 09:37 PM
Give Roadrunner a call roofy. They're not far from you.

Sent from my SM-P600 using Tapatalk

nissannewby
7th June 2016, 07:31 PM
Might want to give Neil a buzz at Roo Dog spares
http://stores.ebay.com.au/ROODOGS-4WD-SPARES

Any luck on those prices mate?

Sir Roofy
7th June 2016, 07:40 PM
Going to town tomorrow PatrolApart just down the road from Janes kids and grand kiddies
usually get a good deal there

Snafu
7th June 2016, 11:16 PM
Advice before installing the uni's remove the caps and pump full of grease to remove all the air then put a bit of grease on the caps, then install. What can happen if you don't fill the uni's internal grease channel you can get a air lock, so when you goto regrease it one of the trunnion's will run dry.
A quick and easy way of removing a uni from the tail shaft is a 9" angle grinder and cut it out then you can easily push the caps out of the yokes.