Ruby
16th April 2011, 09:49 AM
Hi Guys,
Just about to do my rotors all 4 corners. Will attack the rears today; look simple enough and will give me the confidence to do the fronts later. Any pointers welcomed. Have the factory manual at hand.
Rotors are DBA slotted variants and I'm going to try the QFM as they seem to get a very good rap from the rev head and rally communities (WRX and HSV forums). If the QFM are do/don't work out, then I'll at least have something to report to you guys.
I got all 4 rotors from Ebay for $350 - now wait before you roll your eyes or alarm bells ring. The ebay seller has a special arrangement with DBA and they actually hold the stock for him - I picked up the stock from DBA factory at Silverwater in Sydney - you can't get more confidence than that.
Wish me luck
TOOR
Just about to do my rotors all 4 corners. Will attack the rears today; look simple enough and will give me the confidence to do the fronts later. Any pointers welcomed. Have the factory manual at hand.
Rotors are DBA slotted variants and I'm going to try the QFM as they seem to get a very good rap from the rev head and rally communities (WRX and HSV forums). If the QFM are do/don't work out, then I'll at least have something to report to you guys.
I got all 4 rotors from Ebay for $350 - now wait before you roll your eyes or alarm bells ring. The ebay seller has a special arrangement with DBA and they actually hold the stock for him - I picked up the stock from DBA factory at Silverwater in Sydney - you can't get more confidence than that.
Wish me luck
TOOR