Catch Can Block..???

[AD07]

Hi Guys,

I just purchased a Provent (knock off) from eBay , obviously plumbing the inlet and outlet are simple , but im just wondering as the kit comes with no hoses, how anyone that has one went about blocking the 12.5mm drain hole.??

I was thinking maybe a clamp, piece of hose and a small ball valve or something similar.......any help or info much appreciated.



Cheers,

Ad.

[mudski]

Get some 1/2 inch hose and run it down the chassis rail. Put a ball valve tap on it so you can drain it with ease. Thats how I have mine. Its runs down in between the inner guard and chassis rail and sits over where the sway bar mount is on the chassis rail.

[BigRAWesty]

Same with mine.. easy to drain.. easy to see..

[Daveyboyjunior]

Yep, just the same. Extended down into the wheel arch area against the chassis rail, with a tidy external cap on the end.

[nipagu7]

i just went to bunnings and got a irrigation valve with barbed fittings moulded in for a couple of bucks , works perfect , never leaked a drop .

[AD07]

i just went to bunnings and got a irrigation valve with barbed fittings moulded in for a couple of bucks , works perfect , never leaked a drop .

Sounds like a plan.....:wink:

[Ryank]

should do the trick

[my third 256]

66509
this is mine