Catch can

[p8ence]

Probably been asked a million times and have searched without any direct answers..

Wanting to put a catch can on my CRD, honestly i do not fancy spending upto 300 on a provent.. Curious to know if ppl are using the $70 jobs from ebay and if they work well?

Thanks
Dazz

[4bye4]

PM'd you mate. Cheers Tony

[threedogs]

I have an alloy Ebay number with some coarse medium in it [steel wool]
works a treat.
Made it fancy with some braided lines and AN fittings on each end lol

[Firetrol]

PM'd you mate. Cheers Tony

Can you do the same for me Tony?

[4bye4]

Can you do the same for me Tony?
All done mate.

[threedogs]

Did you give Mudski a PM about prices,
Im sure he has competitive prices??

[BigRAWesty]

I've used the provent knock off.. $125.
And about $10 for 700 mm of oil proof vac hose..
Easy done

[Bacho86]

Did you give Mudski a PM about prices,
Im sure he has competitive prices??

Last I remembered Mudski wasn't selling the big ones atm because the supplied jacked up the prices and was no longer competitive... Unless he found another supplier recently?

[BigRAWesty]

Na mudski doesn't do em..

[BigRAWesty]

Have a read of my install here mate.
http://www.nissanpatrol.com.au/forums/showthread.php?t=36453

[mudski]

Yeah not selling them, at the moment. The Provent knock offs are fine. Despite what other say. The oem cans have their part number stamped in the lid of the can. The ones i had, had a ground out section right where the number would be. I suspect these were made for M & H, but i can only speculate.
As for the other cans on ebay. I have seen a couple and they are just empty cans with baffles. Atleast the provent style cans use a filter.
Just dont use the stainless steel washable filters. They dont filter anywhere near as good as the original fibre type filter, which you can still wash anyway.
I used to sell my cans with the stainless filter, only because i wouldn't sell them otherwise.
But yeah. Be wary of some cans. They are just a polished stainless steel can with nothing in them.

Sent from my SM-P600 using Tapatalk

[MyGU8]

I did mine just last couple of days.

Provent200 costed me $165 shipped (ebay Western Filters) and tubes and clamps all around about $200.

I think the price difference between the Provent and other ebay knockoff's are not much these days considering the quality of Provent

[dom14]

Probably been asked a million times and have searched without any direct answers..

Wanting to put a catch can on my CRD, honestly i do not fancy spending upto 300 on a provent.. Curious to know if ppl are using the $70 jobs from ebay and if they work well?

Thanks
Dazz

I wouldn't spend that much on catch can. Provent can't be that expensive, can it?

[p8ence]

I wouldn't spend that much on catch can. Provent can't be that expensive, can it?
Pretty much.. On fleabay ranging from 165 cheapest and if its original to the highest i seen at 385.

I'll be going with a cheaper $55 job with a breather

[dom14]

Pretty much.. On fleabay ranging from 165 cheapest and if its original to the highest i seen at 385.

I'll be going with a cheaper $55 job with a breather

Yeah, that sounds reasonable. I can't justify spending 300+ on a catch can.

[BigRAWesty]

I have a $125 provent knock off..
Cant fault it so far..

[the evil twin]

$14:99 at Bunnings... some assy required

1 Green Scourer (filter medium)
100mm of 50mm Poly Pipe
2 x 50mm end caps
2 x 19mm threaded barbs
2 x 19mm clamps
1 x small tube silastic
another $2:99 for a 13mm on/off drain cock if you want a deluxe model

[shai.dawson]

do ppl have pic's of where they have placed them in late model gu 3lt crd

[BigRAWesty]

I'll grab a link to my install

[BigRAWesty]

do ppl have pic's of where they have placed them in late model gu 3lt crd
http://www.nissanpatrol.com.au/forums/showthread.php?t=36453