Remote entry

[jay see]

I'm looking at installing a keyless entry kit.

I've got a series 1 GU with central locking, but no remote.

Will this work.
http://www.ebay.com.au/itm/291425777706?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Will I need to get anything else.

Do I wire it up from the smart entrance module.

Thanks in advance.

[my third 256]

i think i'd go to j car and talk to them
no instructions of instalation on that one so can't tell what is needed

[Winnie]

I reckon you'll need an actuator for the drivers door mate. But that should be all you need.

[jay see]

Thanks fellas.
Might call into Jaycar on my next day off and see what they got.

[Jay77]

How did you go at jay car? Wouldn't mind doing this on mine.

[Zoc]

Any luck with jay car?

[Mc4by]

I am watching this thread with interest as my remote has ceased functioning.

[jay see]

Sorry guys. Haven't done anything about it.

[sooty_10]

The one you posted Jay see will do the job and as Winnie said you will definitely need a driver's door master actuator. I bought my kit off ebay and a cheap actuator which clapped out, so went into jaycar and got another actuator. Has worked flawless ever since.

Sent from my SM-G925I using Tapatalk

[TPC]

If his Patrol already has central locking I wouldn't think he would need an actuator as it would already be there.

[jay see]

If his Patrol already has central locking I wouldn't think he would need an actuator as it would already be there.I have central locking. So I need a actuator?

Sent from my A1601 using Tapatalk

[TPC]

I did the same thing to a Prado that already had central locking and all I needed was the keyless entry kit. If you didn't have central locking you would need the actuator.

[Zoc]

Does anyone have an example of a hit to use or instructions for installation on a patrol. Very interested in doing this one to my gu1