threedogs
5th February 2016, 04:39 PM
http://www.ebay.com.au/itm/G1-4-5-Way-Manifold-Block-Splitter-Manifold-type-Connect-Air-Pneumatic-Cylinder-/251914907990?hash=item3aa74c7156:g:fiEAAOSw3ydV1u-z.
http://www.ebay.com.au/itm/4Pcs-Pneumatic-Muffler-Filter-Sintered-Bronze-1-8-PT-Silencer-Brass-Mettle-Air-/301740271802?hash=item46411f28ba:g:oG4AAOSw5dNWr6i h
http://www.ebay.com.au/itm/1-4-BSP-Male-to-6mm-Brass-Push-in-Fitting-Pneumatic-Connector-Manufacturer-/251892103431?hash=item3aa5f07907:g:jpEAAOSweW5VETR 9
http://www.ebay.com.au/itm/10m-33ft-Long-Blue-Air-Hose-Line-PU-Tube-6mm-OD-4mm-Inner-Dia-/271682979548?hash=item3f419146dc:g:0wUAAOSw5dNWrhF W
http://www.ebay.com.au/itm/Push-In-One-Touch-to-Connect-90-Degree-Swivel-Elbow-Fitting-6mm-OD-1-4-male-/140824980259?hash=item20c9d2ab23:g:hxsAAOxySoJTVMU k
Heres all you need if you want to run diff breathers using teflon push on hose.
Ive ran this on 2 4x4's for over 20yrs without any problems,
You can buy the manifold with bigger outlets so you could if needed fit a Nitto fitting
for your air hose.
I like these fittings as they're neat and hold a heap of pressure, good for my air horn, lol
If you run a tank all these except the filters will be handy you can even fit a pressure gauge
if you like, if running a tank dont forget a non return valve.
You can even drill and tap the manifold to make mounting easier, a handful of cable ties to finish the job
http://www.ebay.com.au/itm/4Pcs-Pneumatic-Muffler-Filter-Sintered-Bronze-1-8-PT-Silencer-Brass-Mettle-Air-/301740271802?hash=item46411f28ba:g:oG4AAOSw5dNWr6i h
http://www.ebay.com.au/itm/1-4-BSP-Male-to-6mm-Brass-Push-in-Fitting-Pneumatic-Connector-Manufacturer-/251892103431?hash=item3aa5f07907:g:jpEAAOSweW5VETR 9
http://www.ebay.com.au/itm/10m-33ft-Long-Blue-Air-Hose-Line-PU-Tube-6mm-OD-4mm-Inner-Dia-/271682979548?hash=item3f419146dc:g:0wUAAOSw5dNWrhF W
http://www.ebay.com.au/itm/Push-In-One-Touch-to-Connect-90-Degree-Swivel-Elbow-Fitting-6mm-OD-1-4-male-/140824980259?hash=item20c9d2ab23:g:hxsAAOxySoJTVMU k
Heres all you need if you want to run diff breathers using teflon push on hose.
Ive ran this on 2 4x4's for over 20yrs without any problems,
You can buy the manifold with bigger outlets so you could if needed fit a Nitto fitting
for your air hose.
I like these fittings as they're neat and hold a heap of pressure, good for my air horn, lol
If you run a tank all these except the filters will be handy you can even fit a pressure gauge
if you like, if running a tank dont forget a non return valve.
You can even drill and tap the manifold to make mounting easier, a handful of cable ties to finish the job