+ve wire in cab when on ON

[gubigfish]

Hi All,

Trying to wire in my EGT gauge and trying to identify a wire that supplies +ve inside the cab, I've got the service manual here but can't make head or tail of the wiring diagrams.

Cheers
Fish

[threedogs]

Remove the front facia plate around the radio
and you'll find a POS and an ign pos as well

[gubigfish]

Well I found a wire that I though was on or ACC when testing it with a multimeter, switched the car off and no volts just connected it to the gauge and its directly connected to the battery. There were a few expletives let out

[jff45]

There's an ignition feed coming into the diagnostic plug that's easy access

[Softy]

I think i picked mine up off either the factory spot light switch in the dash or the dash dimmer.. can't remember exactly... But best past was the wiring was long enough to pull the switch out of the dash and do all the wiring from the drivers seat without having to break my back with jap hands laying on the floor working over head.

[Winnie]

Cigarette lighter is an easy one

[Sir Roofy]

Wiper moter

[TimE]

Cigarette lighter is an easy one

X2, that is what I use.

[the evil twin]

Try one of these and you can pick up whatever power you want IE Battery, Accessory or Ignition
http://www.ebay.com.au/itm/321430422023?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[gubigfish]

Cheers ET looks like a good option and a bit neater than splicing into existing wires