Tb42 pts on carby model.

[Pezzer]

Hi can anyone help with the location of the TPS for the auto trams on the Tb42 carby.....cheers

[taslucas]

http://www.nissanpatrol.com.au/forums/images/imported/2016/01/163.jpg

tappin from tassie

[taslucas]

At the front of the carby, lower down. (this picture went sideways)

tappin from tassie

[jff45]

Can we assume the plug with the rubber boot elbow is the TPS signal and the other half-white/half-black plug is for the throttle open/throttle closed signal?
Cheers

[taslucas]

No idea! Lol. The tps is the black box with the rubber elbow boot.

>>>tappin from tassie

[Pezzer]

Hi Taslucas the plug going into the Tps how many wires and could you give me the wire colours please.
Regards Pezzer....

[taslucas]

I'll have a closer look in the morning mate, getting dark now

>>>tappin from tassie

[Pezzer]

Hi how did you go?....so close now...lol

[threedogs]

At the front of the carby, lower down. (this picture went sideways)

tappin from tassie

Was yours once a dual fuel set up Lucas

[taslucas]

Hi how did you go?....so close now...lol
Oops I forgot! Going out now...

>>>tappin from tassie

[taslucas]

How's this?http://www.nissanpatrol.com.au/forums/images/imported/2016/02/139.jpghttp://www.nissanpatrol.com.au/forums/images/imported/2016/02/140.jpg

>>>tappin from tassie

[taslucas]

Was yours once a dual fuel set up Lucas
Yep

>>>tappin from tassie

[Pezzer]

Thanks heaps.......

[taslucas]

Thanks heaps.......
No worries mate, hope it helps

>>>tappin from tassie

[jff45]

I'm trying to help Perry sort out his TPS issue with his mix of TD42 TPS and TB42 loom.

Taslucas, any chance you could take a voltage reading from the 3 wires you've shown there where you have a yellow, yellow/red stripe & yellow/blue stripe.
I think the yellow wire should have around 5v
Thanks

[taslucas]

I'm trying to help Perry sort out his TPS issue with his mix of TD42 TPS and TB42 loom.

Taslucas, any chance you could take a voltage reading from the 3 wires you've shown there where you have a yellow, yellow/red stripe & yellow/blue stripe.
I think the yellow wire should have around 5v
Thanks
Me and electronics don't mix haha. Also I don't have a multi meter... I'll see what I can do

>>>tappin from tassie

[jff45]

Ok, no worries, don't risk blowing anything..

[taslucas]

I could probably test it with my tongue?

>>>tappin from tassie

[Pezzer]

Thanks i have a fully converted td42t now but it wont select the the gears in the auto, i cannot five the elusive 5v that jff45 wants me to find. so annoying i want to drive the beast...

[taslucas]

Hmm... Without the input from the tps it should still change up gears when in drive.

So yours won't select a gear at all?

>>>tappin from tassie