View Full Version : [PERTH] Chasing extractors for a TD42 with a 2.5 inch outlet
Ramsey
8th January 2016, 08:36 PM
Hey all,
Chasing extractors for a TD42 with a 2.5 inch outlet. Doesnt matter if it has surface rust, can easily be sand blasted and resprayed.
Regards,
Ramsey
Stropp
8th January 2016, 10:04 PM
You can buy new from mettams mufflers in midland ask for mark
Ramsey
8th January 2016, 10:35 PM
I heard they are quite good in midland, cheers.
Ramsey
9th January 2016, 11:10 AM
Just rang up Mettams and he wanted $380 for a set but I did'nt ask what brand they were.
I did find these on the net and was wondering if anyone has had experience with these Tiger extractors?
http://www.tuffcarparts.com/index.php?route=product/product&product_id=1284
Stropp
9th January 2016, 02:09 PM
Just rang up Mettams and he wanted $380 for a set but I did'nt ask what brand they were.
I did find these on the net and was wondering if anyone has had experience with these Tiger extractors?
http://www.tuffcarparts.com/index.php?route=product/product&product_id=1284
havent heard of them but aussie made so should be ok and 100 bucks cheaper
Ramsey
9th January 2016, 03:15 PM
Seem decent enough, Tiger ones it is.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.