Hi beam problem

[SKID]

I was replacing a switch on the dash of my GU as no mater what position it was in my spotties where on when high beam was selected, there was another switch next to it which looked like it had something to do with lighting as iut had a picture of a head lamp on it, looking at the plugs that were plugged into it, was a very average job done be previous owners.
My problem now is low beam works, if I switch to high beam only the left hand head light lights up, but if I very slowly pull the lever towards the flash head lights position, both the hed lights hig beam work and my spotties work, I've tested all the relays and fuses that are obvious but for the life of me cant figure it out, any suggestions greatly appreicated

[SKID]

Am going to try a replacement stalk from wreckers this arvo

[threedogs]

sounds like the stalk , are you able to give it a squirt
or check the contacts some how??