UVB76
10th December 2015, 07:48 AM
Hi guys.
Planning to remove and clean the intake manifold before Chrissy but have some questions while I'm prepping.
The Max Ellery repair manual just says to replace the "gaskets" while the Haynes manual says to replace the gaskets for the exhaust manifold and oil drain pipe.
Are there any other gaskets to replace on this job?
And where can I get good quality gaskets? PatrolApart has a genuine nissan gasket (http://patrolapart.com.au/product/genuine-nissan-inlet-exhaust-gasket-suit-all-rd28-models/genuine-nissan-inlet-exhaust-gasket-suit-all-rd28-models) - is there better quality available?
And lastly, couldn't find a definitive answer on this, but should a gasket goo be used on these fellas? If so, what's a good brand?
Cheers all!
Planning to remove and clean the intake manifold before Chrissy but have some questions while I'm prepping.
The Max Ellery repair manual just says to replace the "gaskets" while the Haynes manual says to replace the gaskets for the exhaust manifold and oil drain pipe.
Are there any other gaskets to replace on this job?
And where can I get good quality gaskets? PatrolApart has a genuine nissan gasket (http://patrolapart.com.au/product/genuine-nissan-inlet-exhaust-gasket-suit-all-rd28-models/genuine-nissan-inlet-exhaust-gasket-suit-all-rd28-models) - is there better quality available?
And lastly, couldn't find a definitive answer on this, but should a gasket goo be used on these fellas? If so, what's a good brand?
Cheers all!