GQ Twin pot caliper slider frame which side is which?

[twase]

Doing a twin pot upgrade and I am reconditioning the calipers and have mixed up the slider frames when painting. I think the term is correct but the frame I am referring to is the bit that the pads fit in.

The questions.
On the drivers side does the slider frame have the pin whose rubber boot goes all the way through the frame at the top or bottom when mounted?

Does the caliper when mounted have the bleeder at the top or bottom when mounted?

[nissannewby]

Bleeder should always be at the top mate.

[BigRAWesty]

http://www.nissanpatrol.com.au/forums/images/imported/2015/10/383.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2015/10/384.jpghttp://www.nissanpatrol.com.au/forums/images/imported/2015/10/385.jpg

Here ya go bloke..
Left passenger, right drivers..
Bleeder to the top.
Mine are also stamped on the opposing flat spot from the bleed nipple..

[twase]

Can you take a pic showing the right caliper up the other way so the inside of the caliper is showing?
I still need to work out which slide belongs to which caliper.

[twase]

Answer: the pin with the rubber boot that goes through the frame is mounted on the opposite end to the bleeder, the bleeder is top most when on the vehicle.

[BigRAWesty]

They must be different to the gu ones as the gu ones look reversible http://www.nissanpatrol.com.au/forums/images/imported/2015/10/391.jpg

[twase]

Here is a link to a gq twin reco.
http://www.ebay.com.au/itm/Brake-Caliper-Reco-Nissan-Patrol-GQ-EFI-RH-front-Brake-Caliper-EFI-RHF-/121688289574?hash=item1c552ff126
You can see one slide pin comes all the way through the frame where the black round end of it is visible.

[BigRAWesty]

Here is a link to a gq twin reco.
http://www.ebay.com.au/itm/Brake-Caliper-Reco-Nissan-Patrol-GQ-EFI-RH-front-Brake-Caliper-EFI-RHF-/121688289574?hash=item1c552ff126
You can see one slide pin comes all the way through the frame where the black round end of it is visible.
Yea that's different.. I wonder why that is?? Anyway. Glad you got it sorted?

[twase]

Just waiting on the shims, bolts and discs to arrive now. Hopefully this will give me a bit better braking with the van on the back.

[BigRAWesty]

Just waiting on the shims, bolts and discs to arrive now. Hopefully this will give me a bit better braking with the van on the back.
How's the conversion going or did you sell it in the end?

[twase]

Conversion is perfect, at Easter went Sydney- port MacDonald SA and all the way round the coast via the great ocean road to Wollongong then back to Sydney with the van in tow without an issue , absolutely perfect towing machine except for a few moments under brakes, hence the upgrade. Was looking at a ranger as we intend to go around the block at some stage and LPG availability is not going to cut it.

[BigRAWesty]

Conversion is perfect, at Easter went Sydney- port MacDonald SA and all the way round the coast via the great ocean road to Wollongong then back to Sydney with the van in tow without an issue , absolutely perfect towing machine except for a few moments under brakes, hence the upgrade. Was looking at a ranger as we intend to go around the block at some stage and LPG availability is not going to cut it.
Bugger mate. Come all this way and didn't see the best bits. .
I'm only 20 mins from pt mac..
But great to hear it's a successful conversion..

[twase]

I will be back, the other half's parents live in Nangwary and also relatives in the port.

[twase]

Caliper mounting bolt part Nissan 08044 4401A , Spring washer 08915 2441A

[BigRAWesty]

I will be back, the other half's parents live in Nangwary and also relatives in the port.
Ow well there ya go..
Next time ya down yell out.

[nissannewby]

Caliper mounting bolt part Nissan 08044 4401A , Spring washer 08915 2441A

To bad you couldnt get the number sooner mate. They are $1.37 us out of dubai.

[Robo]

Conversion is perfect, at Easter went Sydney- port MacDonald SA and all the way round the coast via the great ocean road to Wollongong then back to Sydney with the van in tow without an issue , absolutely perfect towing machine except for a few moments under brakes, hence the upgrade. Was looking at a ranger as we intend to go around the block at some stage and LPG availability is not going to cut it.

Rangers have a few problems.
oil pump is one, and that's major in anyone's book.
you have your bus near perfect, why start again.

[twase]

To bad you couldnt get the number sooner mate. They are $1.37 us out of dubai.

Installed them last weekend with dimpled and slotted disc's, needs another bleed though. The bolts in my single pot calipers appear identical to the new ones, anyone know why the forums recommend new bolts, I assumed because they were different.

[Winnie]

Installed them last weekend with dimpled and slotted disc's, needs another bleed though. The bolts in my single pot calipers appear identical to the new ones, anyone know why the forums recommend new bolts, I assumed because they were different.
The bolts for the twin piston calipers should be shorter.