Tb42e auto to manual conversion.

[4 by 4]

Hi guys, currently converting my tb carby to efi and the loom I have was from an automatic, and my car is a manual. Ive figured out how to short the inhibitor switch to make the computer think the car is in park/neutral so it will crank over. My only concern in reverse lights. How have people hooked up the auto loom to the reverse switch on the manual box? The loom was cut off the box (admittedly by me, as I thought I wouldnt need any of it) so I do not know which 2 wires go to the reverse switch. Can anyone shed some light and help me out? Cheers.

[Yendor]

The reverse light wiring for the auto harness should be a Green with an Orange trace wire and a Green with a White trace wire.

[Bwaller]

Hi guys, currently converting my tb carby to efi and the loom I have was from an automatic, and my car is a manual. Ive figured out how to short the inhibitor switch to make the computer think the car is in park/neutral so it will crank over. My only concern in reverse lights. How have people hooked up the auto loom to the reverse switch on the manual box? The loom was cut off the box (admittedly by me, as I thought I wouldnt need any of it) so I do not know which 2 wires go to the reverse switch. Can anyone shed some light and help me out? Cheers.



Hey mate I’m in the same boat doing the same conversion just wondering if u get pass on some tips for both ur queries?