PDA

View Full Version : bus bar?



lars04
11th October 2015, 06:26 PM
Just wondering what bus bars a used for ive seen that people put all there negative wires into it for ground. But ive seen the narva fuse blocks where you can put your negative and positive cables in would having this narva fuse block mean i wont need the bus bar?

Hodge
11th October 2015, 06:29 PM
This kind of fuse block, will act as a bus bar for Neg/Ground as well.... Is this what you mean ? Very neat unit and the positives are individually fused.
I believe Baintech AND Narva make a similar model of this variety.

http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=61910&stc=1

lars04
11th October 2015, 06:33 PM
Yea thats like what i seen here is a link of what im looking at.

http://m.ebay.com.au/itm/NARVA-12-WAY-FUSE-BLOCK-BOX-HOLDER-CARAVAN-BOAT-ATS-BLADE-DUAL-BATTERY-12V-54450-/251258124947

Hodge
11th October 2015, 06:34 PM
Yep that is the one. I have the 6 way one under the bonnet, as feed all the smaller 12V stuff from it. Very neat and sturdy.

lars04
11th October 2015, 06:44 PM
Would you put a fuse between the battery and fuse block?

Hodge
11th October 2015, 06:46 PM
I would and have done it on mine to protect the cable running to the fuse block.

lars04
11th October 2015, 06:47 PM
What size fuse did you put in and what gauge cable did you run?

Hodge
11th October 2015, 06:53 PM
I have a 20 fuse sitting there right now, and the cable i've used is 8B&S. Sufficient for my needs right now. Will have to up the fuse later on as I add utilities at the back.

lars04
11th October 2015, 06:54 PM
Sweet great info hodge cheers mate.