gasmixer

[paul1351]

hi everyone havent been on for awhile cuold anyone please help me out with some close up pics of where there gas mixer is located i have 98 4.5 dual fuel i have a sprintgas system gas ringmixer any xtra info on mixer location and pipe positions would be very appreciated thanks

[Bigrig]

Hey mate - don't have a photo, but mine is a small, black cylindrical unit on the inlet pipe from the compressor unit. It has a wide chisel tip slot in it that you can use a screwdriver to adjust. What do you need to do? The lights/gauges on your LPG monitoring unit (under the bonnet also usually - on the firewall on the passengers side) should tell you whether it's running rich or lean and cycling back and forth between the two as you increase, maintain and decrease throttle.

[paul1351]

thanks but dosent help im trying to get mixer ring as close to throttle body as possible while still having all pipes connected and mixer ring installed right way sounds like ur talking bout condenser i need picture where gas goes into inlet in air intake tanks anyway picture would be mad

[Bob]

attached are some Pics that may help. They are of my 1998 GU 4500 L Patrol

[YNOT]

Thanks Bob, second photo is upside down.

Tony

[Bigrig]

Here's a couple - hope they help.

3488

3489

3490

[Bob]

Thanks Bob, second photo is upside down.

Tony

Thats not unusual for me tony

[Bigrig]

Thats not unusual for me tony

If you stand on your head it's the right way around!! lol

[YNOT]

Thats not unusual for me tony

Hold the camera up the other way Bob, the buttons meant to be at the top!

Tony

[Bigrig]

Hold the camera up the other way Bob, the buttons meant to be at the top!

Tony

Or stand on your head!!! Is nobody listening to me??!!! LOL

[Bob]

Or stand on your head!!! Is nobody listening to me??!!! LOL

I am a 69 Year Old suffering from CRAFT and quite a lot of other disabilities so you are lucky I even remembered what I was to take a Pic of. As you said stand on your head

sorry paul we seem to have got off subject sorry mate

[Bigrig]

I am a 69 Year Old suffering from CRAFT and quite a lot of other disabilities so you are lucky I even remembered what I was to take a Pic of. As you said stand on your head

LOL!! We were wondering why you posted those photos in a thread dedicated to interior lighting!!!! lmfao

[paul1351]

my gas mixer ring much closer to throttle body its pissin down in newcastle wen stops i take picture mine and post it and explain what info im after

[paul1351]

dosent actually show where mixer is in air intake unless its inside the intake tube tanks anyway

[YNOT]

The mixer ring is inside the intake tube, all you can see is the gas hose going to it.

Tony

[paul1351]

its a fairway back from manifold