Hutchys ti

[Hutchys ti]

Hi all new member here just on hols in Denham ATM awesome spot with some good trails to go fishing. Heading off to Kalbarri today for more fishing but want to fix problem with my Fourbie before we head for home. After 4wding for a while it sometimes stalls under load. Turn ignition off and it re starts but will sometimes stall again. It is a 2007 3lt crd auto with following mods Steibeaur chip 3" taipan exhaust cross country intercooler egr blank & Dawes valve. Was dynoed after this was done and now having this problem. After reading a lot of posts can't find any with same problem. It does go into limp mode when towing camper so will clean maf sensor next but don't know if that will fix stalling problem. Can anyone help? Cheers Mark.

[Hodge]

Welcome to the forum Mark. Seems like a nice ride you picked up.
What is your boost doing ? As in where is it peaking? Maybe the dawes/needle valves need a bit of tweaking.

[4bye4]

Welcome to the forum mate.

[threedogs]

Hi and welcome to the form. two things have you drilled a hole in the EGR plate.10mm will do
and when you clean the maf disconnect to battery to re-set the ECU
In the mean time jump in anytime and enjoy

[Hutchys ti]

Hi and welcome to the form. two things have you drilled a hole in the EGR plate.10mm will do
and when you clean the maf disconnect to battery to re-set the ECU
In the mean time jump in anytime and enjoythanks threedogs . Yes egr blank has small hole to stop engine light coming on. I think it was around 5mm. Hopefully get some mad cleaner in Kalbarri today. Just annoying when a cruiser gets past me on tracks.

[Hutchys ti]

Welcome to the forum Mark. Seems like a nice ride you picked up.
What is your boost doing ? As in where is it peaking? Maybe the dawes/needle valves need a bit of tweaking.yes it might need tweaking but thought running it up on dyno by a company that only does diesel mods would get it right fairly easily. Don't think it was a Friday job!

[Dhuck]

Welcome to the forum mate.

[blocko05]

Hi and welcome to the forum mate

[MEGOMONSTER]

Welcome mate, surely the best forum on the net.
If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information.
Enjoy the sights and sounds of the greatest show on earth.

[AB]

Welcome to the forum mate, feel free to ask any questions.

[growler2058]

Gday Mark welcome aboard mate

[Briss]

Welcome to the forum Mark,plenty of useful and helpful advise on here mate!

[Plichta]

Welcome to the forum mate.

[Clunk]

G'day mate and welcome aboard