PDA

View Full Version : Smokin' GU



Missy
30th September 2015, 08:16 PM
Ok so I put a 3" stainless exhaust on my crd about a month ago and it seems like it is blowing a bit of black smoke. That is the only mod it's had. None of the nads. Also I changed the oil and filters a week ago and hasn't improved smoke. Not smoking all the time though. When it gets a little rev before its warm and also smoked quite a bit when I gave it a boot full in the mud on the weekend. Anyone know if/why the exhaust has caused this? And how I can fix it without spending any/very little money?

Rock Trol
30th September 2015, 08:33 PM
Does the new exhaust have a catalytic converter on it like the OEM? Some aftermarket exhausts don't have them or they are not as effective as the OEM.

megatexture
30th September 2015, 10:40 PM
Prob unburnt fuel, mine will do that when giving it the boot. I also had my chip wound up and fitted a 3" but didn't turn it down and at the top of hill after giving it a bit to get up the camper trailer smelt like diesel and the stone guard was a little wet..

Missy
30th September 2015, 11:31 PM
It's the berklee exhaust from 4wd super centre so yeah it has cat.

megatexture
30th September 2015, 11:53 PM
It would be a hi-flow of some description

Rock Trol
1st October 2015, 12:06 AM
I suspect high flow cat means very little. Just there to meet the regulations.

HiluxMichael
1st October 2015, 05:00 AM
Hi, i'd say get it on a dyno and air fuel ratio adjusted.

Mich

threedogs
1st October 2015, 08:58 AM
What boost are you running if you know.
Also check to see all small vacume hoses are intact and in place

Missy
1st October 2015, 05:53 PM
No manual valves or boost gauge as yet so what ever they produce standard.